[Gary Smith]

hi guys,
I have got some problems when I run the decomposePar command. Specifically, this command is stuck in a certain position and cannot go on. As shown in the following statement.

[Number of processor faces = 7102
Max number of cells = 25189 (0.6465561893% above average 25027.18519)
Max number of processor patches = 7 (110% above average 3.333333333)
Max number of faces between processors = 816 (55.11123627% above average 526.0740741)

Time = 0
Using #codeStream at line 50 in file "/home/customer/OpenFOAM/customer-v2106/run/shanfeng2.0/basecase/baseCase0(move)3/bubble/0/pointDisplacement.boundaryField.PARTICLE"
Using #codeStream with "/home/customer/OpenFOAM/customer-v2106/run/shanfeng2.0/basecase/baseCase0(move)3/bubble/dynamicCode/platforms/linux64GccDPInt32Opt/lib/libcodeStream_9060a011b8c62534dee419cbca851f90cb93 ea6d.so"
Creating new library in "dynamicCode/_9060a011b8c62534dee419cbca851f90cb93ea6d/platforms/linux64GccDPInt32Opt/lib/libcodeStream_9060a011b8c62534dee419cbca851f90cb93 ea6d.so"
Invoking wmake libso /home/customer/OpenFOAM/customer-v2106/run/shanfeng2.0/basecase/baseCase0(move)3/bubble/dynamicCode/_9060a011b8c62534dee419cbca851f90cb93ea6d
wmake libso /home/customer/OpenFOAM/customer-v2106/run/shanfeng2.0/basecase/baseCase0(move)3/bubble/dynamicCode/_9060a011b8c62534dee419cbca851f90cb93ea6d]

This problem has troubled me for a long time, can anyone help me?
Thanks!

[Lorenzo210]

Hi Gary Smith,

The errors may be inside the type codeStream implemented in pointDisplacement.boundaryField.PARTICLE. Would you please share some information about the BC implemented in the 0 folder?

When you run decomposePar, all the dynamic libraries are created before making all processor* folders, so if the BC is bad implemented then the decomposition process will fail.

[Gary Smith]

Originally Posted by Lorenzo210

Hi Gary Smith,

The errors may be inside the type codeStream implemented in pointDisplacement.boundaryField.PARTICLE. Would you please share some information about the BC implemented in the 0 folder?

When you run decomposePar, all the dynamic libraries are created before making all processor* folders, so if the BC is bad implemented then the decomposition process will fail.

hey Lorenzo210, thanks for your reply. A few days ago, I changed some parameters setting in pointDisplacement and add a libs program in controlDict, and somehow, the program could continue to calculate. Anyway, thanks again and have a nice day.