Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Pre-Processing

Fan boundary condition OpenFOAM

Updated Threads

Reply

Search this Thread

January 7, 2022, 11:15	Fan boundary condition OpenFOAM	#1
Jess80 New Member Jessica Guichard Join Date: Jan 2018 Posts: 3 Rep Power: 8	The fan boundary condition in OpenFOAM, can it only be used in a duct/tunnel or for a ducted fan? If I want to model a fan in free stream, can I only use rotorDisk? I am asking, as it looks like the fan boundary condition needs to have baffles around it, at least I have neither found an example nor a way to use it without baffles.

Reply

Tags

fan boundary condition

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Radiation in semi-transparent media with surface-to-surface model?	mpeppels	CFX	11	August 22, 2019 07:30
CFD analaysis of Pelton turbine	amodpanthee	CFX	31	April 19, 2018 18:02
Total Pressure boundary condition in the OpenFOAM	dli	OpenFOAM Programming & Development	1	December 5, 2017 23:16
Question about adaptive timestepping	Guille1811	CFX	25	November 12, 2017 17:38
[Pointwise] cannot set "fan" boundary condition to 2D Ducted fan model	brksnn	Pointwise & Gridgen	1	January 11, 2013 09:05

All times are GMT -4. The time now is 20:14.