Lee Model coefficients
 

Hello everyone,

I want to properly select the coefficients used in the Lee mass transfer Model. (I'm trying to simulate a continuous casting process)

This forum post already gave me some insight -> https://www.cfd-online.com/Forums/sh...errerid=644850

I would like to understand exactly how the Lee-Model works. The OpenFOAM documentation references a report, but that seems to be missing:

W. H. Lee. ”A Pressure Iteration Scheme for Two-Phase Modeling”. Technical Report LA-UR 79-975. Los Alamos Scientific Laboratory, Los Alamos, New Mexico. 1979.

I have been unable to locate this report. If anyone knows where I can find this paper or any other literature that could be helpful in understanding the Lee mass transfer model, I would greatly appreciate your assistance.

Thank you all in advance!

When I search Google for "A Pressure Iteration Scheme for Two-Phase Modeling", the second result is the full report.

Thank you very much! Kind of embarrassing that it can be found so easily. I searched on Google Scholar, Scopus, and Elsevier and when I used Google I copied the whole reference in the search bar. Rookie mistake.