|
[Sponsors] |
timeVaryingUniformInletOutlet BC implementation |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 12, 2010, 15:39 |
timeVaryingUniformInletOutlet BC implementation
|
#1 |
New Member
Muhammad reza hassani
Join Date: Apr 2010
Posts: 29
Rep Power: 16 |
Dear foamers
I want to specify a time varying velocity inlet as a boundary condition; As i have read about this type of BC in other threads, the timeVaryingUniformInletOutlet can be used. I have prepared a table of time Vs velocity in a .dat file. But when it comes to specify the boundary type in U file in /0 directory, I don't know about some entries: inlet ( type timeVaryingInletOutlet fileName "inletVelocity.dat"; flowRate ...; outOfBounds ...; value ...; ) //and in the .dat file : ( (ti (Ux Uy Uz)) ) I don't know what flowRate, outOfBounds, and value I have to use? In addition to this, Do I have to specify a "p" file as well as this U file in /0 directory which specify a zeroGradient condition for velocity at the outlet too? if yes, what type of boundary condition must be specified in this file for p at the inlet and outlet? muhammad P.S. in order to clarify the last question, I must say that the domain is a 2D channel with a time varying uniform velocity at the inlet along with a zeroGradient Nuemann outlet BC for the outlet. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
OpenFOAM141dev A new implementation of dynamicKistlerGammaContactAngle | eberberovic | OpenFOAM Running, Solving & CFD | 26 | June 10, 2021 04:08 |
Implementation of boundary conditions for FVM | Tom | Main CFD Forum | 7 | August 26, 2014 05:58 |
Please explain the implementation of species transport Eqn in reactingFoam | kallipygian | OpenFOAM Running, Solving & CFD | 0 | October 13, 2008 07:29 |
Implementation details of SST k-omega model | Niels | Main CFD Forum | 3 | July 3, 2008 17:45 |
FEM Implementation of pressure-correction scheme | Markus | Main CFD Forum | 4 | January 6, 2007 01:53 |