CFD set up for turbomachinery

kurne · December 14, 2010, 06:58

Dear All
Will any body help me in setting up for the boundary conditions for Turbo machinery in Open Foam.

boger · December 15, 2010, 08:24

It would be helpful to know what version you are using, what turbomachinery problem you are trying to solve, what boundary conditions it is that you need.

There is a special interest group for turbomachinery and they have some information here, including tutorials, that you might want to look at.

kurne · January 25, 2011, 02:12

Sorry to reply late.Now i am facing the problem of simpleTurboMFRFoam solver from where should i get this solver and the same is the case with the GGI information.

boger · January 25, 2011, 08:23

svn checkout https://openfoam-extend.svn.sourcefo...TurboMachinery
will get you some of the turbomachinery add-ons, but GGI is already in OpenFOAM 1.6-ext (and not in 1.7.1).
As far as simpleTurboMFRFoam, the only mention I see of it is here - maybe you want to follow-up on that thread and see what became of it.

kurne · January 26, 2011, 23:43

Dear Boger
Thanks a lot for replying soon.Well i will follow the guidelines given by you.Well want to ask one question is it possible to use GGI in Open Foam 1.7.1 as no such data is getting in Open Foam user guide as well as Programmers Guide.

boger · January 26, 2011, 23:59

You will only find GGI in the -dev or -ext (extend) versions of OpenFOAM. It was put in initially in OpenFOAM-1.5-dev and is now in OpenFOAM-1.6-ext.

December 14, 2010, 06:58	CFD set up for turbomachinery	#1
kurne Member Kurne Join Date: Aug 2010 Location: Pune, INDIA Posts: 88 Rep Power: 15	Dear All Will any body help me in setting up for the boundary conditions for Turbo machinery in Open Foam. __________________ Simulation Is Determination Of Imagination Towards Approximation ® Best Regards Mubeen K Kurne

December 15, 2010, 08:24		#2
boger Senior Member David Boger Join Date: Mar 2009 Location: Penn State Applied Research Laboratory Posts: 146 Rep Power: 17	It would be helpful to know what version you are using, what turbomachinery problem you are trying to solve, what boundary conditions it is that you need. There is a special interest group for turbomachinery and they have some information here, including tutorials, that you might want to look at. __________________ David A. Boger

January 25, 2011, 02:12	CFD Turbomachinery	#3
kurne Member Kurne Join Date: Aug 2010 Location: Pune, INDIA Posts: 88 Rep Power: 15	Sorry to reply late.Now i am facing the problem of simpleTurboMFRFoam solver from where should i get this solver and the same is the case with the GGI information. __________________ Simulation Is Determination Of Imagination Towards Approximation ® Best Regards Mubeen K Kurne

January 25, 2011, 08:23		#4
boger Senior Member David Boger Join Date: Mar 2009 Location: Penn State Applied Research Laboratory Posts: 146 Rep Power: 17	svn checkout https://openfoam-extend.svn.sourcefo...TurboMachinery will get you some of the turbomachinery add-ons, but GGI is already in OpenFOAM 1.6-ext (and not in 1.7.1). As far as simpleTurboMFRFoam, the only mention I see of it is here - maybe you want to follow-up on that thread and see what became of it. __________________ David A. Boger

January 26, 2011, 23:43		#5
kurne Member Kurne Join Date: Aug 2010 Location: Pune, INDIA Posts: 88 Rep Power: 15	Dear Boger Thanks a lot for replying soon.Well i will follow the guidelines given by you.Well want to ask one question is it possible to use GGI in Open Foam 1.7.1 as no such data is getting in Open Foam user guide as well as Programmers Guide. __________________ Simulation Is Determination Of Imagination Towards Approximation ® Best Regards Mubeen K Kurne

January 26, 2011, 23:59		#6
boger Senior Member David Boger Join Date: Mar 2009 Location: Penn State Applied Research Laboratory Posts: 146 Rep Power: 17	You will only find GGI in the -dev or -ext (extend) versions of OpenFOAM. It was put in initially in OpenFOAM-1.5-dev and is now in OpenFOAM-1.6-ext. __________________ David A. Boger

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help with GNUPlot	Renato.	Main CFD Forum	6	June 6, 2007 19:51
ASME CFD Symposium, Atlanta, July 2001	Chris R. Kleijn	Main CFD Forum	0	September 13, 2000 04:48
ASME CFD Symposium, Atlanta, July 2001	Chris R. Kleijn	Main CFD Forum	0	August 21, 2000 04:49
PC vs. Workstation	Tim Franke	Main CFD Forum	5	September 29, 1999 15:01
Which is better to develop in-house CFD code or to buy a available CFD package.	Tareq Al-shaalan	Main CFD Forum	10	June 12, 1999 23:27