Tutorials for a beginner

jayman · April 25, 2011, 09:57

Hello,

I was wondering if someone could direct me to where I can get tutorials beyond the ones in the usermanual supplied with Openfoam.
Primarily I will be dealing with axis symetic compressible flows, so if you know of specific tutorials with that please let me know.

Thanks,

J

elvis · April 26, 2011, 02:38

Hello,

i want to point you to the usuall suspects ;-).

http://www.tfd.chalmers.se/~hani/kurser/OS_CFD/ also take a look at the material from 2009, 08, 07

http://web.student.chalmers.se/groups/ofw5/Program.htm
http://web.student.chalmers.se/group...ingStarted.pdf etc.

I am not aware of axis symetric example maybe you can post your experience here later.
But I am pretty sure that in the discussions here axis symetric was disscussed

April 25, 2011, 09:57	Tutorials for a beginner	#1
jayman New Member jason Join Date: Apr 2011 Posts: 1 Rep Power: 0	Hello, I was wondering if someone could direct me to where I can get tutorials beyond the ones in the usermanual supplied with Openfoam. Primarily I will be dealing with axis symetic compressible flows, so if you know of specific tutorials with that please let me know. Thanks, J

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Complete beginner with ICEM	dfitz1000	ANSYS Meshing & Geometry	6	January 17, 2011 16:22
BEGINNER: error while loading shared libraries	ka1184	OpenFOAM	3	February 19, 2010 07:11
Install tutorials	jonlemur	OpenFOAM Installation	4	August 8, 2007 14:15
tutorials for icem-cfd v4.1	vince	Main CFD Forum	0	August 23, 2003 15:25
Where can I find Airpak help doc. and tutorials?	Hotlood Wong	FLUENT	3	April 23, 2001 03:55

April 26, 2011, 02:38		#2
elvis Senior Member Elvis Join Date: Mar 2009 Location: Sindelfingen, Germany Posts: 620 Blog Entries: 6 Rep Power: 24	Hello, i want to point you to the usuall suspects ;-). http://www.tfd.chalmers.se/~hani/kurser/OS_CFD/ also take a look at the material from 2009, 08, 07 http://web.student.chalmers.se/groups/ofw5/Program.htm http://web.student.chalmers.se/group...ingStarted.pdf etc. I am not aware of axis symetric example maybe you can post your experience here later. But I am pretty sure that in the discussions here axis symetric was disscussed