CFD Online Logo CFD Online URL
Home > Forums > OpenFOAM Pre-Processing

Problem in defining porous region on an imported tetrahedral mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   May 24, 2011, 02:15
Default Problem in defining porous region on an imported tetrahedral mesh
New Member
Manoj L Das
Join Date: Mar 2011
Location: Calcutta, India
Posts: 25
Rep Power: 8
run_cfd is on a distinguished road


I am trying to solve a problem which involves a compressible flow in porous media with heat transfer effects. My domain is completely filled with porous media i.e all the internal cells have a porosity of 0.6. I imported the mesh from starCD by "star4ToFoam", but the imported OF mesh didn't detected the porous region. Could any body tell me how to assign a porosity of 0.6 to all the internal cells of this imported OF mesh. I edited the files of tutorial 'angledductImplicit' of 'rhoPorousSimpleFoam'.

run_cfd is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
problem with Min/max rho tH3f0rC3 OpenFOAM 7 February 23, 2013 06:37
Using starToFoam clo OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 33 September 26, 2012 04:04
[ICEM] Unstructure Meshing Around Imported Plot3D Structured Mesh ICEM kawamatt2 ANSYS Meshing & Geometry 17 December 20, 2011 12:45
[ICEM] problem of Non-concidence mesh jeevankumarb ANSYS Meshing & Geometry 1 March 4, 2011 09:47
unstructured vs. structured grids Frank Muldoon Main CFD Forum 1 January 5, 1999 11:09

All times are GMT -4. The time now is 13:18.