|
[Sponsors] |
December 4, 2011, 05:22 |
Pressure driven flow
|
#1 |
Member
Join Date: Jun 2011
Posts: 38
Rep Power: 14 |
Hey!
I'm trying to simulate the flow through a block knowing only the pressure at the inlet. The velocity at the inlet is calculated with "pressureInletVelocity". But what adjustments do I have to set at the outlet? Are these correct: Code:
outlet { type inletOutlet; inletValue uniform (0 0 0); value $internalField; } regards Christian |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
BCs for pressure driven flow using rhoCentralFoam | eric.m.tridas | OpenFOAM | 7 | January 10, 2015 10:31 |
Reversed flow at pressure outlet | Seeker Phil | FLUENT | 9 | January 2, 2010 06:21 |
pressure BC in buoynacy driven flow | Sasha | FLUENT | 3 | October 11, 2006 11:08 |
fluid flow fundas | ram | Main CFD Forum | 5 | June 17, 2000 22:31 |
Hydrostatic pressure in 2-phase flow modeling (CFX4.2) | HB &DS | CFX | 0 | January 9, 2000 14:19 |