CFD Online Discussion Forums

CFD Online Discussion Forums (
-   OpenFOAM Pre-Processing (
-   -   MRFSimpleFoam convergence problems (

Attesz March 17, 2012 06:29

MRFSimpleFoam convergence problems
Hi all,

I'm doing a complicated low-fan simulation in OF 2.1. with MRFSimpleFoam. As I'm getting convergence problems, I'm thinking about two things to avoid it:
1. bad initial results - how can set the rotating field for U in the rotor zone?
2. starting at a much lower rotational velocity and ramp it up by hand. i'm thinking about to use the changeDictionary tool


All times are GMT -4. The time now is 09:09.