|
[Sponsors] |
March 26, 2013, 00:42 |
New Boundary condition
|
#1 |
Senior Member
starter
Join Date: Sep 2012
Posts: 125
Rep Power: 15 |
Hi
In openfoam, I am trying to make new boundary condition; from parabolic to powerLaw for turbulent flow. While doing this, when I input $wmake libso customJetPatchField it gives me the following error: no rules to make target “ customJetPatchField.dep” needed by Make linux 64 GCcDP0pt/dependecies”. Stop Secondly, when I type in simpleFoam to run, it says patchFields not available. Instead it gives me a list of patchfields from Make/files file in openfoam211 folder. Also it does not recognize my powerLawVelocity. Despite the fact that I have followed the tutorial at the link http://openfoamwiki.net/index.php/Si...ry_/_Tutorials. I have modified controlDict file as well. Can anyone please advise how I can resolve these issues as this is my first experience with OpenFoam and I have only freshly started doing my MS in CFD. I shall be very grateful. Regards Last edited by sihaqqi; March 26, 2013 at 01:40. |
|
March 26, 2013, 22:25 |
|
#2 |
Senior Member
starter
Join Date: Sep 2012
Posts: 125
Rep Power: 15 |
problem solved
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Domain Imbalance | HMR | CFX | 5 | October 10, 2016 05:57 |
Radiation interface | hinca | CFX | 15 | January 26, 2014 17:11 |
Error finding variable "THERMX" | sunilpatil | CFX | 8 | April 26, 2013 07:00 |
Setting outlet Pressure boundary condition using CAFFA code | Mukund Pondkule | Main CFD Forum | 0 | March 16, 2011 03:23 |
How exactly the "pressure outlet" bdry condition compute properties on the boundary? | yating9901 | FLUENT | 3 | June 28, 2010 12:26 |