CFD Online Logo CFD Online URL
Home > Forums > OpenFOAM Programming & Development

no match for ‘operator+’ in ‘Foam::operator*(const Foam::tmp<Foam::GeometricField

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   May 27, 2013, 03:46
Default no match for ‘operator+’ in ‘Foam::operator*(const Foam::tmp<Foam::GeometricField
New Member
Join Date: Mar 2013
Posts: 2
Rep Power: 0
tjugn is on a distinguished road
HI Foamers:
I added a source term (momSource) to the momentum equation of NS in interFoam to generate waves, the definition of momSource is in the createFields.H:
and modified the pEqn.H and UEqn.H as follows:
but,when I comiled it the following erros are being produced:

I would appreciate if you help me fix it!
tjugn is offline   Reply With Quote



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[ANSYS Meshing] Match Control, is this weird or am I stupid? Moufle ANSYS Meshing & Geometry 2 November 18, 2015 17:00
Match Control and Symmetry Boundary Condtions in a quasi 2D calculation peterputer ANSYS Meshing & Geometry 0 May 15, 2012 08:53
area does not match neighbour by ... % -- possible face ordering problem St.Pacholak OpenFOAM 9 November 22, 2011 11:02
gmsh2ToFoam sarajags_89 OpenFOAM 0 November 24, 2009 23:50
Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 July 15, 2005 04:15

All times are GMT -4. The time now is 13:28.