CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Programming & Development

Help to setup a simple 2D moving mesh (Wave Tank Simulation)

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 22, 2013, 21:08
Default Help to setup a simple 2D moving mesh (Wave Tank Simulation)
  #1
Member
 
Arthur Loginow
Join Date: Aug 2012
Posts: 99
Rep Power: 13
Maralady is on a distinguished road
I would like to know if someone knows about where to find Dynamic Mesh, Moving Boundaries documentation, I have been reading the tutorials but I was not able to find any valuable information about it.

Imagine a rectangle, 4 walls, left, bottom, right and top wall, I just need to move the left wall based on a sin function, so far so easy, but I can not find information about the solver or how to program the moving boundary, I have been told to use the wave2foam solver (I will check on that right now) but still have to program the moving wall, any suggest? Some documentation that I can use?

Thanks
Maralady is offline   Reply With Quote

Old   September 23, 2013, 19:40
Default
  #2
Member
 
Arthur Loginow
Join Date: Aug 2012
Posts: 99
Rep Power: 13
Maralady is on a distinguished road
Can someone please tell me where can I find the interFoam.c file?
Maralady is offline   Reply With Quote

Old   September 25, 2013, 12:38
Default
  #3
Member
 
laurentb's Avatar
 
Laurent B
Join Date: Jun 2009
Location: Lille, FRANCE
Posts: 70
Rep Power: 16
laurentb is on a distinguished road
The file is in opt/openfoam220/applications/solvers/multiphase/interFoam
laurentb is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Sliding mesh setup for a mixing tank in Gambit nycera FLUENT 13 October 11, 2016 15:39
Mesh motion with Translation & Rotation Doginal CFX 2 January 12, 2014 07:21
[ICEM] Using a hybrid mesh for a simple pipe Udio_NT ANSYS Meshing & Geometry 17 October 18, 2012 15:42
[Gmsh] 2D Mesh Generation Tutorial for GMSH aeroslacker OpenFOAM Meshing & Mesh Conversion 12 January 19, 2012 04:52
Moving Mesh Velocity Issue: Mesh velocity does not equal displacement Doginal CFX 2 September 8, 2011 13:02


All times are GMT -4. The time now is 00:36.