CFD Online Logo CFD Online URL
Home > Forums > OpenFOAM Programming & Development

reactingFoam => reactingPorousFoam Solver Modification Validation

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   January 2, 2014, 06:33
Default reactingFoam => reactingPorousFoam Solver Modification Validation
New Member
Join Date: Feb 2010
Posts: 22
Rep Power: 9
Filankes is on a distinguished road
Dear Foamers

1. I managed to add porousmedia to reactingFoam, it works, but I am not sure if I did it right...

How do you validate the solver after modification? could you please share your experience?

I did some runs with rhoPorousSimpleFoam, and reactingPorousFoam, it works, it is the same results, but still there are several staff I did not understand in the Pimple solver and Simple solver.

Do I have to add something additionally for Pimple solver? (but I guess I will have to check my result after each simulation with my own solver...because i can't trust myself)))

2. I don't know if it is implicit or explicit solution. nUCorrectors = 0 in transient simulation?

so all transient simulations are explicit?
Filankes is offline   Reply With Quote

Old   May 2, 2014, 09:47
Default reactingPorousFoam Solver
New Member
Li Liu
Join Date: Nov 2009
Posts: 16
Rep Power: 0
commonyue is on a distinguished road
Hi Filanks, thank you for putting information here. I am working on adding porousmedia to reactingFoam (have just started). You said you have managed to do this already. I wonder if you could share the detailed infomation how did you mange to do this (is it possible to share the openfoam file?)? it will be greatly helpful for my work. Thank you.
commonyue is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
thobois class engineTopoChangerMesh error Peter_600 OpenFOAM 4 August 2, 2014 09:52
Interfoam blows on parallel run danvica OpenFOAM Running, Solving & CFD 16 December 22, 2012 03:09
Unexplained Error during Solver Runs cfb CFX 6 November 9, 2012 16:42
Working directory via command line Luiz CFX 4 March 6, 2011 21:02
why the solver reject it? Anyone with experience? bearcat CFX 6 April 28, 2008 14:08

All times are GMT -4. The time now is 23:20.