|
[Sponsors] |
Adding a new Interfacial model in compressibleTwophaseeulerfoam |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 23, 2014, 12:55 |
Adding a new Interfacial model in compressibleTwophaseeulerfoam
|
#1 | |
New Member
nikhil r
Join Date: Oct 2013
Posts: 2
Rep Power: 0 |
Hi all,
I want to add a mass transfer model to bring out the effect of evaporation in two phase solver. Heat transfer Model already exists as an Interfacial model. So, I just copied it and renamed all the occurrence of heat to mass to start with. Accordingly I have added the header files in the main file and created one field for mass transfer coefficient as done for heat transfer coefficient. But while compiling I am getting the following error. Quote:
|
||
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Adding graviational acc. to turbulence model | fertinaz | OpenFOAM Programming & Development | 6 | December 12, 2020 00:04 |
Adding new Transport properties model | dvcauwe | OpenFOAM Programming & Development | 12 | March 26, 2017 04:30 |
Adding thermophysical model to chemistryType runtime table | ChrisA | OpenFOAM Programming & Development | 3 | March 10, 2014 09:37 |
Adding a turbulence model into my own CFD code | quarkz | Main CFD Forum | 3 | November 23, 2013 22:53 |
Convergence becomes very slow after adding thin material model for CHT | Anna Tian | CFX | 1 | June 6, 2013 18:03 |