|
[Sponsors] |
compressibleTwoPhaseEulerFoam: convergence problem |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 20, 2014, 07:01 |
compressibleTwoPhaseEulerFoam: convergence problem
|
#1 |
New Member
simone colucci
Join Date: May 2014
Location: Pisa (Italy)
Posts: 4
Rep Power: 11 |
Dear all,
I found the following problem in adding source terms in compressibleTwoPhaseEulerFoam: when I add a source term in UEqns it is ok, when I try to add appropriate source terms in any other equation there are problems in converging. For example adding in EEqns .H - fvm::Sp( (gamma/rho1), he1 ) - (gamma/rho1)*K1 in he1Eqn e - fvm::Sp( (gamma/rho2), he2 ) - (gamma/rho2)*K2 in EEqns in he2Eqn (you can do the same adding any other different term) I have: --> FOAM FATAL ERROR: Maximum number of iterations exceeded Why? Thank you in advance Simone |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Convergence Problem in Axisymmetric Periodic Flow | atheresia | FLUENT | 3 | February 10, 2014 04:00 |
Force can not converge | colopolo | CFX | 13 | October 4, 2011 23:03 |
convergence problem when use pisoFoam, LES for wind tunnel case | Forrest_Lei | OpenFOAM | 3 | July 19, 2011 07:00 |
Convergence of CFX field in FSI analysis | nasdak | CFX | 2 | June 29, 2009 02:17 |
Non Convergence of 3D Heat transfer cfd problem | Balraj | Main CFD Forum | 3 | December 9, 2004 01:24 |