|July 9, 2015, 02:45||
boundary conditions in twoPhaseEulerFoam
Join Date: Jul 2015
Posts: 3Rep Power: 3
I am trying to solve multiphase problem and I used twoPhaseEulerFoam
The problem is like below.
phase A : air(discontinuous)
phase B : liquid(continuous)
density : A<<B
system : initially filled with phase B, gravity=(0,0,-9.8)
inlet : alpha A=0.1, Ua=(0,0,-10), Ub=(0,0,-10)
outlet : pressure outlet(p=0), back flow could be happened.
At that case, how should I set the boundary conditions for alpha, U1, U2, p, etcs?
|Thread||Thread Starter||Forum||Replies||Last Post|
|TwoPhaseEulerFoam and Boundary conditions||raagh77||OpenFOAM Running, Solving & CFD||98||September 23, 2013 06:31|
|Low Mixing time Problem||Mavier||CFX||5||April 29, 2013 00:00|
|inlet boundary conditions||newOFuser||OpenFOAM||1||January 10, 2013 09:08|
|Trimmed cell and embedded refinement mesh conversion issues||michele||OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ...||2||July 15, 2005 04:15|
|A problem about setting boundary conditions||lyang||Main CFD Forum||0||September 19, 1999 18:29|