Adding the Energy Equation to interFoam (OF 2.4.0)

satendra · July 11, 2017, 04:57

i am working on same topic but i am using OF 4.0 and mkraposhin sir your code is not compile here please help me .

vporte · March 27, 2019, 11:24

Hi,

I'm using the last version of OpenFoam and I have a problem to add temperature equations in interFoam solver.

I saw a code which works for OpenFoam version 2.3.1 but it doesn't work for the new versions.

If someone can help me, it will be great !

I joined the old code to this message.

interThermalFoam.tar.gz

sarina · July 17, 2023, 08:54

Dear Perry,
I'm trying to modify the interFoam code to use damBreak with temperature as you did. I have a problem during compiling the libraries for the src folder: I get errors about the viscosityModelNew.C file in the /opt/openfoam8 folder that obviously I didn't modify. Could you help me?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Source Term due to evaporation in energy transport equation	styleworker	OpenFOAM Programming & Development	3	September 7, 2022 04:09
Adding Energy Equation for porousSimpleFoam	yesaswi92	OpenFOAM Programming & Development	20	April 13, 2018 09:17
Definition of energy equation using UDF	aestas	Fluent UDF and Scheme Programming	15	April 28, 2015 04:33
help adding the energy equation to porousinterfoam using the enthalpy formulation	nadine	OpenFOAM Programming & Development	18	June 17, 2014 09:39
Why FVM for high-Re flows?	Zhong Lei	Main CFD Forum	23	May 14, 1999 14:22

July 11, 2017, 04:57		#41
satendra New Member S P Chauhan Join Date: Feb 2017 Posts: 2 Rep Power: 0	i am working on same topic but i am using OF 4.0 and mkraposhin sir your code is not compile here please help me .

March 27, 2019, 11:24		#42
vporte New Member Join Date: Mar 2019 Posts: 1 Rep Power: 0	Hi, I'm using the last version of OpenFoam and I have a problem to add temperature equations in interFoam solver. I saw a code which works for OpenFoam version 2.3.1 but it doesn't work for the new versions. If someone can help me, it will be great ! I joined the old code to this message. interThermalFoam.tar.gz

July 17, 2023, 08:54		#43
sarina New Member Join Date: Jun 2023 Posts: 11 Rep Power: 4	Dear Perry, I'm trying to modify the interFoam code to use damBreak with temperature as you did. I have a problem during compiling the libraries for the src folder: I get errors about the viscosityModelNew.C file in the /opt/openfoam8 folder that obviously I didn't modify. Could you help me?