Implementation of new omega and nut wall functions

zordiack · December 31, 2015, 06:13

Hi, I finished implementing new adaptive wall functions by Tobias Knopp et al. The new wall functions should be user together, so use omegaKnoppWallFunction with nutUKnoppWallFunction and maybe kLowReWallFunction (zerogradient k to the wall is not correct in the buffer zone, but I'm not sure yet which k wall function is best with these).

They can be downloaded from here:

https://github.com/zordiack/foam-dev.../wallFunctions

All comments and testing are welcome, I tested it with pitzDaily and at least it didn't crash

The implementation is based on paper:

Knopp, T., Alrutz, T. and Schwamborn, D. (2006)
"A Grid and flow adaptive wall-function method for RANS turbulence modelling"
Journal of Computational Physics, Volume 220, 19-40

These are supposed to give more grid independent results compared to square root blending. Next on my wall function implementation list is compound wall treatment for k-e-zeta-f by M. Popovac and K. Hanjalic

Ardali · December 31, 2015, 06:50

Hi,
Thanks for sharing the code.
It gives a error. You need to declare a variable!

But my question is, I did not get your point about Popovac Hanjalic Wall function!
Where can I find it?
Sincerely,
Ardalan

zordiack · January 4, 2016, 05:17

How did you try to compile it? And at what point does it give you an error? Did you add limytubulenceModels.so to controlDict libs?

There are no other wall functions yet, but I plan to implement them in the future.

Ardali · January 4, 2016, 05:37

Hi,
I'll manage to compile it. That's fine.
I'm extremely interested in the other wall function. Actually I gave a course project in openFoam course at Chalmers last year (2015) about the Wall function but the student, who took it, dropped the course.
Please let me know when the implementation is ready.
Best Regards
Ardalan Javadi

khedar · December 6, 2016, 15:17

Hi, is the repository moved or deleted. I can't access the link.

khedar

December 31, 2015, 06:13	Implementation of new omega and nut wall functions	#1
zordiack Member Pekka Pasanen Join Date: Feb 2012 Location: Finland Posts: 87 Rep Power: 14	Hi, I finished implementing new adaptive wall functions by Tobias Knopp et al. The new wall functions should be user together, so use omegaKnoppWallFunction with nutUKnoppWallFunction and maybe kLowReWallFunction (zerogradient k to the wall is not correct in the buffer zone, but I'm not sure yet which k wall function is best with these). They can be downloaded from here: https://github.com/zordiack/foam-dev.../wallFunctions All comments and testing are welcome, I tested it with pitzDaily and at least it didn't crash The implementation is based on paper: Knopp, T., Alrutz, T. and Schwamborn, D. (2006) "A Grid and flow adaptive wall-function method for RANS turbulence modelling" Journal of Computational Physics, Volume 220, 19-40 These are supposed to give more grid independent results compared to square root blending. Next on my wall function implementation list is compound wall treatment for k-e-zeta-f by M. Popovac and K. Hanjalic akidess, ssss and HesamAUT like this.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wall functions - questions about implementation	AlmostSurelyRob	OpenFOAM Programming & Development	44	May 6, 2020 10:11
Why Menter's SST model low-Re issue has not been seriously investigated?	vkrastev	OpenFOAM	58	January 8, 2018 15:20
Issue symmetryPlane 2.5d extruded airfoil simulation	281419	OpenFOAM Running, Solving & CFD	5	November 28, 2015 13:09
k-Omega SST - Wall functions in OF 2.3	shereez234	OpenFOAM Running, Solving & CFD	4	November 12, 2015 02:54
incorrect to use nuTilda wall functions for k-epsilon?	newToOpenFoam	OpenFOAM Pre-Processing	0	December 14, 2011 05:15

December 31, 2015, 06:50		#2
Ardali Member Ardalan Join Date: Jul 2012 Location: Atlanta, USA Posts: 77 Rep Power: 13	Hi, Thanks for sharing the code. It gives a error. You need to declare a variable! But my question is, I did not get your point about Popovac Hanjalic Wall function! Where can I find it? Sincerely, Ardalan

January 4, 2016, 05:17		#3
zordiack Member Pekka Pasanen Join Date: Feb 2012 Location: Finland Posts: 87 Rep Power: 14	How did you try to compile it? And at what point does it give you an error? Did you add limytubulenceModels.so to controlDict libs? There are no other wall functions yet, but I plan to implement them in the future.

January 4, 2016, 05:37		#4
Ardali Member Ardalan Join Date: Jul 2012 Location: Atlanta, USA Posts: 77 Rep Power: 13	Hi, I'll manage to compile it. That's fine. I'm extremely interested in the other wall function. Actually I gave a course project in openFoam course at Chalmers last year (2015) about the Wall function but the student, who took it, dropped the course. Please let me know when the implementation is ready. Best Regards Ardalan Javadi

December 6, 2016, 15:17		#5
khedar Senior Member khedar Join Date: Oct 2016 Posts: 111 Rep Power: 9	Hi, is the repository moved or deleted. I can't access the link. khedar