How to continue a paused Simulation case with ctrl+c

mohsen.boojari · March 14, 2016, 16:30

Hi,
I know that we can pause a simulation or runnig case with ctrl+c keys. but I want to know how to continue the rest of simulation? which keys should I use? or should I start from beginning?

Thanks

akidess · March 15, 2016, 03:45

Ctrl+C is abort, not pause.

MJavad · March 15, 2016, 04:33

I think for that, you can apply Ctrl+s to stop for a while and press Ctrl+Q to continue.
But if you want to check for instance, paraview at the same time , I recommend you instead of Ctrl+c , open another Terminal and do that

akidess · March 15, 2016, 04:40

Ctrl+S just suspends the terminal output. To suspend the process, you use Ctrl+Z.

March 14, 2016, 16:30	How to continue a paused Simulation case with ctrl+c	#1
mohsen.boojari Member Mohsen Join Date: Oct 2012 Posts: 47 Rep Power: 15	Hi, I know that we can pause a simulation or runnig case with ctrl+c keys. but I want to know how to continue the rest of simulation? which keys should I use? or should I start from beginning? Thanks

March 15, 2016, 03:45		#2
akidess Senior Member Anton Kidess Join Date: May 2009 Location: Germany Posts: 1,377 Rep Power: 31	Ctrl+C is abort, not pause. __________________ On twitter @akidTwit Spend as much time formulating your questions as you expect people to spend on their answer.

March 15, 2016, 04:40		#4
akidess Senior Member Anton Kidess Join Date: May 2009 Location: Germany Posts: 1,377 Rep Power: 31	Ctrl+S just suspends the terminal output. To suspend the process, you use Ctrl+Z. __________________ On twitter @akidTwit Spend as much time formulating your questions as you expect people to spend on their answer.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Issues on the simulation of high-speed compressible flow within turbomachinery	dowlee	OpenFOAM Running, Solving & CFD	11	August 6, 2021 07:40
interrupt the simulation, check results, continue simulation	soulsaver	Phoenics	1	June 28, 2013 02:15
Boundary condition setting regarding turbine simulation using CFX	Lacerlacer	CFX	11	March 12, 2012 10:32
Free surface boudary conditions with SOLA-VOF	Fan	Main CFD Forum	10	September 9, 2006 13:24
Ask for case of SOFC simulation in FLUENT	Bayern	FLUENT	0	October 8, 2005 00:00

March 15, 2016, 04:33		#3
MJavad New Member Join Date: Mar 2016 Posts: 3 Rep Power: 11	I think for that, you can apply Ctrl+s to stop for a while and press Ctrl+Q to continue. But if you want to check for instance, paraview at the same time , I recommend you instead of Ctrl+c , open another Terminal and do that