CFD Online Logo CFD Online URL
Home > Forums > OpenFOAM Programming & Development

adding brinkmann term to Darcy

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   September 10, 2016, 02:58
Default adding brinkmann term to Darcy
New Member
Join Date: Aug 2015
Location: IRAN
Posts: 1
Rep Power: 0
yasseri is on a distinguished road
Hi foamer's
I'm trying to add brinkmann model ( mu * lapplacian V ) to the Darcy equation ( -grad P = mu/k * V ) it will be :
-grad P = mu/k * V - mu * lapplacian V
finally V ;
tnx lot

Last edited by yasseri; September 10, 2016 at 10:40.
yasseri is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
conjugateHeatFoam + interFoam farhagim OpenFOAM Programming & Development 15 July 19, 2016 07:55
Problem adding a source term in interfoam's alphaEqn.H Quentin OpenFOAM Running, Solving & CFD 1 July 30, 2014 05:33
Adding an energy source term to a phase with reactions lxlxlxt Fluent Multiphase 0 February 10, 2014 21:42
Adding an explicit source term in the UEqn() Anne Lincke OpenFOAM Running, Solving & CFD 0 June 25, 2013 12:19
ATTENTION! Reliability problems in CFX 5.7 Joseph CFX 14 April 20, 2010 15:45

All times are GMT -4. The time now is 12:55.