 |
 |
 |
|
|
|
[Sponsors] | ||||
velocity field of MRF, GGI and rotatingWallVelocity |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 14, 2016, 07:22
|
velocity field of MRF, GGI and rotatingWallVelocity
|
#1 |
|
New Member
Sergej
Join Date: Aug 2015
Location: Cologne, Germany
Posts: 10
Rep Power: 10  |
Hello Foamers,
I have a question about the velocity field generated by MRF, GGI and the BC rotatingWallVelocity next to a surface. Why the velocity fields are different?  For example I attach one picture of the MRFsimpleFoam generated velocity field and one of the pimpleDyMfoam. In my opinion the velocity field of MRFsimpleFoam is the right one. But maybe the velocity field generated by pimpleDyMfoam is just the tangential velocity field? The velocity field genereted by the BC rotatingWallVelocity looks the same as the velocity field of pimpleDyMfoam. |
|
|
|
|
|
October 14, 2016, 11:04
|
Problem solved
|
#2 |
|
New Member
Sergej
Join Date: Aug 2015
Location: Cologne, Germany
Posts: 10
Rep Power: 10 |
The vector field in the picture GGIturbo.jpg is not converged enough. So they would show all the same velocity field.
|
|
|
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Floating point exception error | Alan | OpenFOAM Running, Solving & CFD | 11 | July 1, 2021 21:51 |
| Difficulty in calculating angular velocity of Savonius turbine simulation | alfaruk | CFX | 14 | March 17, 2017 06:08 |
| Create a GeometricField of a given type on given patch? | philippose | OpenFOAM Programming & Development | 4 | August 12, 2013 12:41 |
| Frozen Rotor 1:1 Mesh Connection | pharley | CFX | 5 | January 31, 2013 16:15 |
| Difference between ggi and overlapGgi? GGI Tips and Tricks? | philippose | OpenFOAM Running, Solving & CFD | 7 | January 16, 2013 09:40 |
Linear Mode
