CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Programming & Development

Conflict between turboFvMesh and processorFvPatch

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 29, 2017, 02:01
Default Conflict between turboFvMesh and processorFvPatch
  #1
Member
 
Janry
Join Date: Oct 2015
Posts: 46
Rep Power: 10
qjh888 is on a distinguished road
Hi foamers,

I've tried to run simulation parallal with OpenFOAM.
However, I've found an bug(maybe error) during simulation progress.

My case set up is:
  • dynamic mesh, using turboFvMesh;
  • decomposePar with 2 parts, applying processorFvPatch boundary condition to the ridge.
However, when I inspecting the result and found that the U, p, T... feilds are disconnected. That means the processor boundary condition just act as a slip wall, information cannot passing through the boundary.


So are there anyone facing with this problems before?
How to have a nice talk about fixing the bug or problem.


Janry
qjh888 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 06:37.