CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Programming & Development

Adding a source term to compressibleInterFoam

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 21, 2018, 10:41
Default Adding a source term to compressibleInterFoam
  #1
Member
 
Join Date: May 2017
Posts: 44
Rep Power: 5
bbita is on a distinguished road
Dear Foamers,

I would like to add a new term to pressure equation in compressibleInterFoam. The term accounts the mass transfer between two phases without volume change (only concentrations are changing). What I am looking for is reducing pressure in the system due to concentration change.

Thanks.
bbita is offline   Reply With Quote

Reply

Tags
compressibleinterfoam, mass transfer, pressure equation, source term

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
momentum source term zwdi FLUENT 14 June 27, 2017 15:40
polynomial BC srv537 OpenFOAM Pre-Processing 4 December 3, 2016 09:07
Problem adding a source term in interfoam's alphaEqn.H Quentin OpenFOAM Running, Solving & CFD 1 July 30, 2014 05:33
Problem compiling a custom Lagrangian library brbbhatti OpenFOAM Programming & Development 2 July 7, 2014 11:32
DecomposePar links against liblamso0 with OpenMPI jens_klostermann OpenFOAM Bugs 11 June 28, 2007 17:51


All times are GMT -4. The time now is 06:38.