CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Programming & Development

porous media in two-phase flow

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 14, 2020, 16:54
Default porous media in two-phase flow
  #1
New Member
 
roshan
Join Date: Dec 2019
Posts: 9
Rep Power: 2
roshanak.rabiee878 is on a distinguished road
Hi
I am working in the simulation of two-phase flow with porous media. I add porous media by using Darcy-Forchimier source term in momentum. it has two constants related to permeability C1 (m-2)and inertia resistance C2 (m-1).
My question is related to how I can attribute C1, C2 to relative values? . I saw in literature they multiply intrinsic permeability by volume phase fraction. is it correct?
If yes, we totally have 4 constant numbers that must be put in software.
instead of 4 constant numbers can I put average values for permeability and inertia resistance coefficient of both phases and reduce them to two values?
roshanak.rabiee878 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fluent - Flow/heat transfer over porous media - possibly interface issue ayihan FLUENT 0 March 3, 2018 18:55
Multiphase flow in porous media sirpolar Fluent Multiphase 1 July 11, 2014 18:35
flow thru porous media, PLEASE HELP Goker FLUENT 4 September 8, 2012 04:02
multiphase flow in porous media zhou FLUENT 2 August 9, 2012 07:10
Porous media flow with diffusion albertinho OpenFOAM 0 March 31, 2010 17:14


All times are GMT -4. The time now is 08:42.