Looking for paper "Implementation of level set method ..." by Bitan Shu, et al

opedrofunk · January 14, 2016, 16:16

Guys,
Literally, the first hit on a google search is a bootleg copy of the complete paper:

http://www.scribd.com/doc/28869684/I...d-Flows#scribd

Saideep · February 26, 2016, 08:26

Hello everyone,

I have been trying to implement coupled LS and VOF within the interFoam solver and tried to follow Albadawi's paper.

I have seen that the surface forces are much more stable along with the capillary pressure computation but somehow the spurious velocities are generated at the interface surface.

I have tried a static drop relaxation and the bubble relaxes and stays at the center but the velocities generated at the interface are extremely high. Around 0.5 - 2m/s. Getting worse with finer mesh.

Could anyone share a paper, where this method has been implemented in openfoam.

Thanks,
Saideep

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
setting of level set method as initial condition	sooroo3	FLUENT	4	July 31, 2018 04:20
calculating Normal vector in level set method	amir2920	Main CFD Forum	1	July 21, 2009 07:25
Level set vs VOF	steve	Main CFD Forum	11	September 16, 2008 00:22
level set for multi-fluids system?	Pei-Ying Hsieh	Main CFD Forum	1	July 19, 2000 16:42
level set method with TVD scheme?	zhanglei	Main CFD Forum	1	April 25, 2000 14:01

January 14, 2016, 16:16		#61
opedrofunk Member Peter Join Date: Feb 2015 Location: New York Posts: 73 Rep Power: 10	Guys, Literally, the first hit on a google search is a bootleg copy of the complete paper: http://www.scribd.com/doc/28869684/I...d-Flows#scribd

February 26, 2016, 08:26		#62
Saideep Senior Member Saideep Join Date: Apr 2015 Location: INDIA Posts: 203 Rep Power: 11	Hello everyone, I have been trying to implement coupled LS and VOF within the interFoam solver and tried to follow Albadawi's paper. I have seen that the surface forces are much more stable along with the capillary pressure computation but somehow the spurious velocities are generated at the interface surface. I have tried a static drop relaxation and the bubble relaxes and stays at the center but the velocities generated at the interface are extremely high. Around 0.5 - 2m/s. Getting worse with finer mesh. Could anyone share a paper, where this method has been implemented in openfoam. Thanks, Saideep