movingCone case with time-dependent displacement

McCarra · December 8, 2010, 10:20

Hello,

I would like to introduce a time-dependent displacement on movingCone. How can I do it? In the case the velocity is constant and set to 1 m/s.
What changes should I include?

Thanks

McCarra · January 9, 2011, 09:59

I got it.

The boundary condition to apply to the moving wall in 0/pointMotionUx is different. The condition is : timeVaryingUniformFixedValue.

And, just if anyone is interested, all the options in this tutorial case (pimpleDyMFoam/movingCone) to set as boundary conditions are:

calculated
cyclic
empty
fixedNormalSlip
fixedValue
global
mixed
processor
slip
symmetryPlane
timeVaryingUniformFixedValue
uniformFixedValue
value
wedge
zeroGradient

Hope it helps

Regards!

McCarra · January 10, 2011, 04:22

More precisely, the options above are related to a pointScalarField. In the movingCone case, pointMotionUx is a pointScalarField.

All possible boundary conditions for a volVectorField, like for example U (velocity), the options are some more:

SRFVelocity
activeBaffleVelocity
advective
calculated
cellMotion
cyclic
cylindricalInletVelocity
directMapped
directMappedVelocityFlux
directionMixed
empty
fixedGradient
fixedInternalValue
fixedNormalSlip
fixedValue
flowRateInletVelocity
fluxCorrectedVelocity
freestream
inletOutlet
mixed
movingWallVelocity
oscillatingFixedValue
outletInlet
outletMappedUniformInlet
partialSlip
pressureDirectedInletOutletVelocity
pressureDirectedInletVelocity
pressureInletOutletVelocity
pressureInletUniformVelocity
pressureInletVelocity
pressureNormalInletOutletVelocity
processor
rotatingPressureInletOutletVelocity
rotatingWallVelocity
sliced
slip
supersonicFreestream
surfaceNormalFixedValue
surfaceSlipDisplacement
swirlFlowRateInletVelocity
symmetryPlane
timeVaryingFlowRateInletVelocity
timeVaryingMappedFixedValue
timeVaryingMappedPressureDirectedInletVelocity
timeVaryingUniformFixedValue
timeVaryingUniformInletOutlet
translatingWallVelocity
turbulentInlet
uniformFixedValue
waveTransmissive
wedge
zeroGradient

Some of them appear in tutorials, but MOST of them do not!

All the best

December 8, 2010, 10:20	movingCone case with time-dependent displacement	#1
McCarra Member Usit McCarra Join Date: Oct 2010 Posts: 51 Blog Entries: 2 Rep Power: 15	Hello, I would like to introduce a time-dependent displacement on movingCone. How can I do it? In the case the velocity is constant and set to 1 m/s. What changes should I include? Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Superlinear speedup in OpenFOAM 13	msrinath80	OpenFOAM Running, Solving & CFD	18	March 3, 2015 05:36
time dependent problem	Adrian	FLUENT	6	October 14, 2008 22:24
Differences between serial and parallel runs	carsten	OpenFOAM Bugs	11	September 12, 2008 11:16
time dependent velocity input by user subroutine	shohel mahmud	Siemens	4	December 18, 2007 11:40
time dependent curve	faiz rauf	FLUENT	0	August 31, 2004 13:02

January 9, 2011, 09:59		#2
McCarra Member Usit McCarra Join Date: Oct 2010 Posts: 51 Blog Entries: 2 Rep Power: 15	I got it. The boundary condition to apply to the moving wall in 0/pointMotionUx is different. The condition is : timeVaryingUniformFixedValue. And, just if anyone is interested, all the options in this tutorial case (pimpleDyMFoam/movingCone) to set as boundary conditions are: calculated cyclic empty fixedNormalSlip fixedValue global mixed processor slip symmetryPlane timeVaryingUniformFixedValue uniformFixedValue value wedge zeroGradient Hope it helps Regards!

January 10, 2011, 04:22		#3
McCarra Member Usit McCarra Join Date: Oct 2010 Posts: 51 Blog Entries: 2 Rep Power: 15	More precisely, the options above are related to a pointScalarField. In the movingCone case, pointMotionUx is a pointScalarField. All possible boundary conditions for a volVectorField, like for example U (velocity), the options are some more: SRFVelocity activeBaffleVelocity advective calculated cellMotion cyclic cylindricalInletVelocity directMapped directMappedVelocityFlux directionMixed empty fixedGradient fixedInternalValue fixedNormalSlip fixedValue flowRateInletVelocity fluxCorrectedVelocity freestream inletOutlet mixed movingWallVelocity oscillatingFixedValue outletInlet outletMappedUniformInlet partialSlip pressureDirectedInletOutletVelocity pressureDirectedInletVelocity pressureInletOutletVelocity pressureInletUniformVelocity pressureInletVelocity pressureNormalInletOutletVelocity processor rotatingPressureInletOutletVelocity rotatingWallVelocity sliced slip supersonicFreestream surfaceNormalFixedValue surfaceSlipDisplacement swirlFlowRateInletVelocity symmetryPlane timeVaryingFlowRateInletVelocity timeVaryingMappedFixedValue timeVaryingMappedPressureDirectedInletVelocity timeVaryingUniformFixedValue timeVaryingUniformInletOutlet translatingWallVelocity turbulentInlet uniformFixedValue waveTransmissive wedge zeroGradient Some of them appear in tutorials, but MOST of them do not! All the best