reactingFoam tutorial for OpenFOAM 2.1.0

ToTh · July 25, 2012, 07:32

Hello everyone,

I'm new here as well as to the exciting world of CFD.

In my bachelor-thesis I have to simulate a gas combustion using OpenFOAM. I decided to use reactingFoam and found the tutorial for that solver made by Andreas Lundström in 2008 (http://openfoamwiki.net/index.php/Tu..._firstTutorial) and how to adapt it to OpenFOAM 1.7.

Apparently the "g"-file from the the dieselFoam-Tutorial has to be included in the "constant"-folder of the reactingFoam-case. Unfortunately, however, OpenFOAM 2.1.0 doesn't have any dieselFoam-solver anymore.

Has anyone had that problem, too? Or can anyone please tell me, how to get this tutorial going using OpenFOAM 2.1.0?

Thank you and kind regards!
Toby

bartholomew83 · September 3, 2012, 04:43

Hi Toby,

there is a tutorial for reactingFoam.

$home/OpenFOAM/user-2.1.1/run/tutorials/combustion/reactingFoam/ras/counterFlowFlame2D

regards

July 25, 2012, 07:32	reactingFoam tutorial for OpenFOAM 2.1.0	#1
ToTh New Member Join Date: Jul 2012 Posts: 4 Rep Power: 13	Hello everyone, I'm new here as well as to the exciting world of CFD. In my bachelor-thesis I have to simulate a gas combustion using OpenFOAM. I decided to use reactingFoam and found the tutorial for that solver made by Andreas Lundström in 2008 (http://openfoamwiki.net/index.php/Tu..._firstTutorial) and how to adapt it to OpenFOAM 1.7. Apparently the "g"-file from the the dieselFoam-Tutorial has to be included in the "constant"-folder of the reactingFoam-case. Unfortunately, however, OpenFOAM 2.1.0 doesn't have any dieselFoam-solver anymore. Has anyone had that problem, too? Or can anyone please tell me, how to get this tutorial going using OpenFOAM 2.1.0? Thank you and kind regards! Toby

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem on Fluent Tutorial: Horizontal Film Boilig	Feng	FLUENT	2	April 13, 2013 05:34
[Virtualization] OpenFOAM oriented tutorial on using VMware Player - support thread	wyldckat	OpenFOAM Installation	2	July 11, 2012 16:01
[Gmsh] 2D Mesh Generation Tutorial for GMSH	aeroslacker	OpenFOAM Meshing & Mesh Conversion	12	January 19, 2012 03:52
reactingFoam wedge handling wrong U	dhondupant	OpenFOAM Bugs	1	December 9, 2010 07:34
reactingFoam - turbulent reacting flow	hamburgFoam	OpenFOAM	0	December 7, 2009 12:57

September 3, 2012, 04:43		#2
bartholomew83 New Member Join Date: Jul 2012 Posts: 1 Rep Power: 0	Hi Toby, there is a tutorial for reactingFoam. $home/OpenFOAM/user-2.1.1/run/tutorials/combustion/reactingFoam/ras/counterFlowFlame2D regards