particle combustion

ToTh · August 23, 2012, 07:39

Hello everyone,

I can imagine this is an interesting topic for many people...

in my Bachelor thesis I have to simulate the combustion of certain particles (surrogate fuels, meaning garbage particles).

Now, I decided to use fireFoam as a solver, but have no idea how to include particles. I was able to simulate CH4 combustion as a gas, but how on earth is it possible to include particles?

I did the "simplifiedSiwek" tutorial for coalChemistryFoam. I got this to run, but am not able to use the burner I need. It couldn't find the "parcel injector cell" when I use the burner I need for the thesis instead of the burner of the tutorial case.

Can anyone please give me any tips? Did anyone simulate burning particles or know how to do it? If not fireFoam, what solver would you recommend?

Thanks a lot in advance,
Toby

ToTh · August 30, 2012, 03:46

Hello again,
this topic might get a little more interesting if I write what I've done so far

To include particle combustion I tried to compile my own Solver. To do so I did the steps of this tutorial (page 20 following). Instead of combining solidParticle and simpleFoam I combined solidParticle and fireFoam.

After a while I was able to compile the stuff. Unfortunately following error occurs when I try to work with the solver now:

--> FOAM FATAL ERROR:

request for volScalarField nu from objectRegistry region0 failed
available objects of type volScalarField are

85
(
aLambda_0
Qin6
Qin0
hs_0
a
Qr7
psi
Qem7
I1
Qin4
fres_CO2
CO2
Qr5
Qr1
psi_0
G
ILambda_2_0
dpdt
O2_0
ILambda_1_0
I7
I3
CH4_0
wFuel
p
T
Qr3
Qr
Qin5
p_0
alphaSgs
fres_N2
H2O
I5
fres_H2O
ILambda_7_0
ILambda_4_0
ILambda_5_0
fres_O2
H2O_0
fres_CH4
ILambda_0_0
N2
K
I4
Qr0
ILambda_3_0
Qem4
K_0
Qem
Qr4
CO2_0
Qin1
p_rgh_0
rho
k
Qin
Qem6
I6
O2
p_rgh
Qin7
gh
Qem5
delta
Qin2
CH4
Qin3
I2
dQ
alpha
rho_0
Qem1
I0
Qem0
k_0
ILambda_6_0
bLambda_0
Qem3
mu
hs
Qr2
Qem2
muSgs
Qr6
)

From function objectRegistry::lookupObject<Type>(const word&) const
in file /opt/openfoam210/src/OpenFOAM/lnInclude/objectRegistryTemplates.C at line 131.

FOAM aborting

#0 Foam::error:

rintStack(Foam::Ostream&) in "/opt/openfoam210/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
#1 Foam::error::abort() in "/opt/openfoam210/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
#2 Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const& Foam:

bjectRegistry::lookupObject<Foam::Geometric Field<double, Foam::fvPatchField, Foam::volMesh> const>(Foam::word const&) const
#3

#4

#5 __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6"
#6

Could anyone please tell me what I did wrong?

I would much appreciate any reply...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
hydrocarbon gases + Boron particle combustion	nileshjrane	OpenFOAM	1	December 13, 2010 06:20
DPM UDF particle position using the macro P_POS(p)[i]	dm2747	FLUENT	0	April 17, 2009 01:29
single particle combustion	masoud	Siemens	0	November 20, 2004 01:06
CFX5.7 coal combustion and other reaction particle	Leosding	CFX	0	April 21, 2004 08:58
combustion of Aluminum particle in oxidant-rich ga	Devy	FLUENT	5	March 4, 2003 02:56

August 23, 2012, 07:39	particle combustion	#1
ToTh New Member Join Date: Jul 2012 Posts: 4 Rep Power: 13	Hello everyone, I can imagine this is an interesting topic for many people... in my Bachelor thesis I have to simulate the combustion of certain particles (surrogate fuels, meaning garbage particles). Now, I decided to use fireFoam as a solver, but have no idea how to include particles. I was able to simulate CH4 combustion as a gas, but how on earth is it possible to include particles? I did the "simplifiedSiwek" tutorial for coalChemistryFoam. I got this to run, but am not able to use the burner I need. It couldn't find the "parcel injector cell" when I use the burner I need for the thesis instead of the burner of the tutorial case. Can anyone please give me any tips? Did anyone simulate burning particles or know how to do it? If not fireFoam, what solver would you recommend? Thanks a lot in advance, Toby

August 30, 2012, 03:46		#2
ToTh New Member Join Date: Jul 2012 Posts: 4 Rep Power: 13	Hello again, this topic might get a little more interesting if I write what I've done so far To include particle combustion I tried to compile my own Solver. To do so I did the steps of this tutorial (page 20 following). Instead of combining solidParticle and simpleFoam I combined solidParticle and fireFoam. After a while I was able to compile the stuff. Unfortunately following error occurs when I try to work with the solver now: --> FOAM FATAL ERROR: request for volScalarField nu from objectRegistry region0 failed available objects of type volScalarField are 85 ( aLambda_0 Qin6 Qin0 hs_0 a Qr7 psi Qem7 I1 Qin4 fres_CO2 CO2 Qr5 Qr1 psi_0 G ILambda_2_0 dpdt O2_0 ILambda_1_0 I7 I3 CH4_0 wFuel p T Qr3 Qr Qin5 p_0 alphaSgs fres_N2 H2O I5 fres_H2O ILambda_7_0 ILambda_4_0 ILambda_5_0 fres_O2 H2O_0 fres_CH4 ILambda_0_0 N2 K I4 Qr0 ILambda_3_0 Qem4 K_0 Qem Qr4 CO2_0 Qin1 p_rgh_0 rho k Qin Qem6 I6 O2 p_rgh Qin7 gh Qem5 delta Qin2 CH4 Qin3 I2 dQ alpha rho_0 Qem1 I0 Qem0 k_0 ILambda_6_0 bLambda_0 Qem3 mu hs Qr2 Qem2 muSgs Qr6 ) From function objectRegistry::lookupObject<Type>(const word&) const in file /opt/openfoam210/src/OpenFOAM/lnInclude/objectRegistryTemplates.C at line 131. FOAM aborting #0 Foam::error:rintStack(Foam::Ostream&) in "/opt/openfoam210/platforms/linux64GccDPOpt/lib/libOpenFOAM.so" #1 Foam::error::abort() in "/opt/openfoam210/platforms/linux64GccDPOpt/lib/libOpenFOAM.so" #2 Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const& Foam:bjectRegistry::lookupObject<Foam::Geometric Field<double, Foam::fvPatchField, Foam::volMesh> const>(Foam::word const&) const #3 #4 #5 __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6" #6 Could anyone please tell me what I did wrong? I would much appreciate any reply...