immortality |
March 6, 2013 18:09 |
is internalField(U) equivalent to zeroGradient?
when I set BC for U to zeroGradient or:
Code:
right
{
type groovyBC;
fractionExpression "0";
gradientExpression "vector(0,0,0)";
}
it answers without any error
but when I set it to:
Code:
right
{
type groovyBC;
fractionExpression "1";
valueExpression "internalField(U)";//vector(internalField(U).x,0,0)
}
it falls to an error on T(energy equation probably) as so:
Code:
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = -3333091.721
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = 4080511.561
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = -7124696.499
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = 5774453.414
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = -6575768.989
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = 5981361.409
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = 1404258.482
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = -17090209.16
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = 36020792.5
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = -94818398.64
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = 40233402.34
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = -106376680.8
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = 37389446.51
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = -76115211.3
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = -24650104.63
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = -26951665.22
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = 471535.4463
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = 465677.0027
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = 277204.4414
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = -145721.0621
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = 15779.92442
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = 112883.4828
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = -3083.273126
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = 43.52495911
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = 4976486.257
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = 3178348.937
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = -32897237.32
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = -44825686.95
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = -22612.51171
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = -1870.615087
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = 9690.272357
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = -39521.73991
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = 93265.31041
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = -340838.0148
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = 610015.5259
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = -1813983.217
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = 2650248.864
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000; T = -6558287.943
I thought that internalField(U) or vector(internalField(U).x,0,0) do the same way as zeroGradient(or in groovyBC gradientExpression"0" does).
why?
|