CFD Online Discussion Forums

CFD Online Discussion Forums (
-   OpenFOAM Running, Solving & CFD (
-   -   Moving heat source (

ahmmedshakil April 10, 2013 04:09

Moving heat source
Hi guys,
I want to simulate the following equation:
$ \frac{dT}{dt} -v \frac{dT}{dx}= \frac{k}{\rho Cp} \nabla^{2} T +S $
Now I am little bit confused about v, i.e velocity. In OpenFOAM, whether I have to set up as boundary condition or internal field ?
Thanks in advance.

All times are GMT -4. The time now is 19:31.