CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Running, Solving & CFD (https://www.cfd-online.com/Forums/openfoam-solving/)
-   -   what boundary condition is proper for simulation of shock-tube low pressure part? (https://www.cfd-online.com/Forums/openfoam-solving/117125-what-boundary-condition-proper-simulation-shock-tube-low-pressure-part.html)

immortality May 2, 2013 13:22

what boundary condition is proper for simulation of shock-tube low pressure part?
 
2 Attachment(s)
I simulated a case of shock tube with high pressure part of 932190pa and low pressure part of 303975pa.I found that during the run pressure in mid places is around 600000pa and total pressure about 650000.
now I want to only simulate low pressure part and need to replace high pressure part by an appropriate boundary condition.
then which pressure should I put there in the patch in return of high pressure part for pressure?
932190pa that is the value of high pressure part in first time or 650000 as total pressure?
which seems more correct?:confused:


All times are GMT -4. The time now is 23:19.