 |
 |
 |
|
|
|
[Sponsors] | ||||
June 25, 2013, 14:56
|
From a smaller Mesh to a Bigger
|
#1 |
|
Member
Evangelos
Join Date: Sep 2011
Posts: 87
Rep Power: 14  |
Hello Foamers !
I ran simple and i took the results from a gemomtery with small mesh(300000 cells) . Finally i create the same geomtery with (2500000 cells) Can i adapt the results from the small mesh to the bigger and run the code in order to save time |
|
|
|
|
|
June 25, 2013, 15:05
|
|
#2 |
|
Member
Join Date: Sep 2012
Posts: 51
Rep Power: 13 |
Hi,
you can run the mapFields tools to start the 2nd simulation with the results from the previous simulation. There is an example in the icoFoam tutorials. |
|
|
|
|
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [ICEM] surface mesh merging problem | everest | ANSYS Meshing & Geometry | 44 | April 14, 2016 06:41 |
| [blockMesh] blockMesh for bigger mesh | gwierink | OpenFOAM Meshing & Mesh Conversion | 15 | July 8, 2014 05:53 |
| erroneous temps in conjugate model? | sieginc. | STAR-CCM+ | 11 | July 14, 2012 03:41 |
| fluent add additional zones for the mesh file | SSL | FLUENT | 2 | January 26, 2008 11:55 |
| basic of mesh refinement | arya | CFX | 4 | June 19, 2007 12:21 |
Linear Mode
