[ebah6]

Dear all,

I am using pimpleDyMFoam in OF-2.1.0 with rotating parts.

My geometry is obtained from pointwise which gives me 5 files that I put in the constant/polyMesh directory. I modified some of the boundary conditions to be able to visualize the grid with paraFoam.

Now that I execute the pimpleDyMFoam command, I receive the following errors at the fisrt time step :
-------------------------------------------

Create mesh for time = 0

Selecting dynamicFvMesh solidBodyMotionFvMesh
Selecting solid-body motion function rotatingMotion
Applying solid body motion to cellZone bladesAndRotor
#0 Foam::error:rintStack(Foam::Ostream&) in "/home/alpha/OpenFOAM/OpenFOAM-2.1.0/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
#1 Foam::sigSegv::sigHandler(int) in "/home/alpha/OpenFOAM/OpenFOAM-2.1.0/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
#2 in "/lib/x86_64-linux-gnu/libc.so.6"
#3 Foam::solidBodyMotionFvMesh::solidBodyMotionFvMesh (Foam::IOobject const&) in "/home/alpha/OpenFOAM/OpenFOAM-2.1.0/platforms/linux64GccDPOpt/lib/libdynamicFvMesh.so"
#4 Foam::dynamicFvMesh::addIOobjectConstructorToTable <Foam::solidBodyMotionFvMesh>::New(Foam::IOobjec t const&) in "/home/alpha/OpenFOAM/OpenFOAM-2.1.0/platforms/linux64GccDPOpt/lib/libdynamicFvMesh.so"
#5 Foam::dynamicFvMesh::New(Foam::IOobject const&) in "/home/alpha/OpenFOAM/OpenFOAM-2.1.0/platforms/linux64GccDPOpt/lib/libdynamicFvMesh.so"
#6
in "/home/alpha/OpenFOAM/OpenFOAM-2.1.0/platforms/linux64GccDPOpt/bin/pimpleDyMFoam"
#7 __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6"
#8
in "/home/alpha/OpenFOAM/OpenFOAM-2.1.0/platforms/linux64GccDPOpt/bin/pimpleDyMFoam"
Segmentation fault

----------------------------

Have some already encountered this type of issue and/or is able to help me out?

Thank you all for your time.

My best regards.

[Kaskade]

I've been trying to set up a case analogous to the propeller tutorial. I get a similar error.

I have used stl geometries and snappyHexMesh to generate the mesh. Except for some skewed cells checkMesh doesn't complain.

[Artur]

I think I know what your problem is. See this post:

http://www.cfd-online.com/Forums/ope...tml#post437972

(you renamed your cellZone too as far as I can tell from the snippet you posted)