Converting Pointwise volumes to OpenFOAM
Hello all
I have managed to sucessfully export some pointwise meshes to openFoam already by setting the solver, then changing boundary conditions and export->CAE with blocks selected. This worked fine. What didnt work was when I tried to use 'set volume conditions' using the same method as for boundary condtions but no extra files were produced in the directory. I am trying to simulate a case with 2 cubes side by side, one filled with cold gas, the other with a hot solid, then solving for heat transfer. I know the example is simple but if I could get the export working then I would move to more complex geometries. Any help on this matter would be appreciated :) edit: apologies forthis being in the wrong section |
I do not believe that Pointwise's volume conditions are available for export to OpenFOAM, I use the OpenFOAM utilities like setField to perform this function.
|
Ah, that would make sense. Do you know how I can get information on how to use setField then?
Thanks |
look at the AllRun script for the dam break tutorial.
|
All times are GMT -4. The time now is 08:49. |