|
[Sponsors] |
September 28, 2013, 02:26 |
Using interDyMFoam with a static mesh
|
#1 |
New Member
Nazanin
Join Date: Sep 2013
Posts: 22
Rep Power: 12 |
Hi Bruno Santos
sorry i use this topic for my question.. generally can we use of moving mesh solver (such az interDyFoam) for a case without moving mesh?(my question in generally). I have modify solver with moving mesh solver but i want use for my case that have not moving mesh.. sorry again(i am new in this froum) Regards, |
|
September 28, 2013, 05:39 |
|
#2 | |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,974
Blog Entries: 45
Rep Power: 128 |
Greetings Nazanin and welcome to the forum!
I've moved your post from the thread http://www.cfd-online.com/Forums/ope...ntstack-2.html onto a new thread, since it's a completely different topic. Next time, open a new thread and send me a private message with the link to the thread As for your question: you can configure the "dynamicMeshDict" file to use static mesh, as exemplified in the tutorial "multiphase/interFoam/laminar/damBreak", where the file "constant/dynamicMeshDict" has got the following content: https://github.com/OpenFOAM/OpenFOAM...ynamicMeshDict Quote:
Bruno
__________________
|
||
September 28, 2013, 10:57 |
|
#3 | |
New Member
Nazanin
Join Date: Sep 2013
Posts: 22
Rep Power: 12 |
Quote:
Thank you very much for reply in fact,first,I dont know how build a new topic... Az you said,I can use interDyFoam, just in my case (constant/dynamicMeshDict) I shoud use staticFvMesh for a static mesh(without moving mesh)??I think i cant use this solver,because the pEqn.H and ... is diferrent....?? Regards, |
||
September 28, 2013, 11:03 |
|
#4 | |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,974
Blog Entries: 45
Rep Power: 128 |
Hi Nazanin,
Read this thread: http://www.cfd-online.com/Forums/sit...on-forums.html Quote:
Bruno
__________________
|
||
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Star CCM Overset Mesh Error (Rotating Turbine) | thezack | Siemens | 7 | October 12, 2016 11:14 |
[snappyHexMesh] No layers in a small gap | bobburnquist | OpenFOAM Meshing & Mesh Conversion | 6 | August 26, 2015 09:38 |
[ICEM] Hexa mesh, curve mesh setup, bunching law | Anorky | ANSYS Meshing & Geometry | 4 | November 12, 2014 00:27 |
interDyMFoam in OF 2.0.1 : seg fault during mesh refinement | michaelb | OpenFOAM Running, Solving & CFD | 3 | July 2, 2012 08:16 |
Read inside a class | tonyuprm | OpenFOAM | 12 | July 14, 2010 02:35 |