[waves2Foam] Has anyone tried to create breaking wave with wave2Foam

vince_44 · September 23, 2013, 04:21

Hi all

I would like to know if somebody have try to create breaking wave with wave2Foam.

BR

Vincent

ngj · September 24, 2013, 13:43

Hi Vince,

I term of references you can look in my thesis and our 2012 paper accompanying waves2Foam. Besides that, several people have been discussing breaking in this thread, and the references on the waves2Foam wiki might also be helpful.

Kind regards,

Niels

Maralady · September 24, 2013, 23:05

Hello, I am trying to install waves2Foam but I am a beginner with both (OpenFOAM & Ubuntu), I am not quite sure what to do at this step

The output should be placed in FOAM_USER_APPBIN, so modify Make/files so it reads

waveFoam.C

EXE = $(FOAM_USER_APPBIN)/waveFoam

I assume that I have to write that at the console but just copy and paste? (I apologize if someone asked this at the past and I did not read it)

----

Hello Vince, I will try to simulate waves and breaking waves as soon as I am able to install waves2Foam got tons of material about it

----

Can I install waves2Foam in OpenFOAM 2.2.1? At the list they do not have the new version, but I dont know if that is just because they have not made an update still

----

Someone has a tutorial case of waveFoam? I made some modifications to the interFoam case but I am not quite sure how to create the pistonboundary

ngj · September 25, 2013, 18:20

Hi Arthur,

Have you tried the tutorial folder on the svn repository for waves2Foam. You can easily check it out by following the instructions on the wiki.

Kind regards,

Niels

Maralady · September 25, 2013, 18:44

ngj thanks for your reply, I did not see that before, I will check them right now, once again thanks

kobelak · September 26, 2013, 11:14

Hi Vince and Maralady,
As I already posted, I'm working on breaking waves. I'm trying to obtain the same results as Niels did. I hope to post here some results as soon possible, in order to share our ideas.

Fanfei · July 31, 2015, 10:33

Quote:

Originally Posted by kobelak

Hi Vince and Maralady,
As I already posted, I'm working on breaking waves. I'm trying to obtain the same results as Niels did. I hope to post here some results as soon possible, in order to share our ideas.

Hi kobelak:
have you simulated the breaking wave successful?
Best Regards
Fan Fei

September 23, 2013, 04:21	Has anyone tried to create breaking wave with wave2Foam	#1
vince_44 Member vincent Join Date: Apr 2011 Posts: 45 Rep Power: 14	Hi all I would like to know if somebody have try to create breaking wave with wave2Foam. BR Vincent

September 24, 2013, 13:43		#2
ngj Senior Member Niels Gjoel Jacobsen Join Date: Mar 2009 Location: Copenhagen, Denmark Posts: 1,900 Rep Power: 37	Hi Vince, I term of references you can look in my thesis and our 2012 paper accompanying waves2Foam. Besides that, several people have been discussing breaking in this thread, and the references on the waves2Foam wiki might also be helpful. Kind regards, Niels __________________ Please note that I do not use the Friend-feature, so do not be offended, if I do not accept a request.

September 24, 2013, 23:05		#3
Maralady Member Arthur Loginow Join Date: Aug 2012 Posts: 99 Rep Power: 13	Hello, I am trying to install waves2Foam but I am a beginner with both (OpenFOAM & Ubuntu), I am not quite sure what to do at this step The output should be placed in FOAM_USER_APPBIN, so modify Make/files so it reads waveFoam.C EXE = $(FOAM_USER_APPBIN)/waveFoam I assume that I have to write that at the console but just copy and paste? (I apologize if someone asked this at the past and I did not read it) ---- Hello Vince, I will try to simulate waves and breaking waves as soon as I am able to install waves2Foam got tons of material about it ---- Can I install waves2Foam in OpenFOAM 2.2.1? At the list they do not have the new version, but I dont know if that is just because they have not made an update still ---- Someone has a tutorial case of waveFoam? I made some modifications to the interFoam case but I am not quite sure how to create the pistonboundary Last edited by wyldckat; August 25, 2018 at 14:03. Reason: merged multiple consecutive posts made on the same day

September 25, 2013, 18:20		#4
ngj Senior Member Niels Gjoel Jacobsen Join Date: Mar 2009 Location: Copenhagen, Denmark Posts: 1,900 Rep Power: 37	Hi Arthur, Have you tried the tutorial folder on the svn repository for waves2Foam. You can easily check it out by following the instructions on the wiki. Kind regards, Niels __________________ Please note that I do not use the Friend-feature, so do not be offended, if I do not accept a request.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
internal wave breaking	varghese	FLUENT	3	October 11, 2015 04:07
simulation of breaking solitary wave	mehdi icho	Main CFD Forum	0	July 2, 2002 04:35
Breaking Wave Simulation	Mehdi BEN HAJ	Main CFD Forum	2	February 12, 2002 11:07
Breaking Wave Simulation	Mehdi BEN HAJ	CFX	0	February 9, 2002 12:34
Breaking Wave Simulation	Mehdi BEN HAJ	FLUENT	0	February 9, 2002 12:31

September 25, 2013, 18:44		#5
Maralady Member Arthur Loginow Join Date: Aug 2012 Posts: 99 Rep Power: 13	ngj thanks for your reply, I did not see that before, I will check them right now, once again thanks

September 26, 2013, 11:14		#6
kobelak New Member Pietro Danilo Tomaselli Join Date: Oct 2012 Location: Lyngby, DTU Posts: 9 Rep Power: 13	Hi Vince and Maralady, As I already posted, I'm working on breaking waves. I'm trying to obtain the same results as Niels did. I hope to post here some results as soon possible, in order to share our ideas.