CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

CHEMKIN format incompatibilities with reduced n-Heptane mechanism

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   December 23, 2013, 07:00
Default CHEMKIN format incompatibilities with reduced n-Heptane mechanism
New Member
H. Kriete
Join Date: Dec 2013
Posts: 4
Rep Power: 11
kriete is on a distinguished road
Hello everyone,
trying to use chemFoam with reduced n-Heptane reaction mechanisms from [1], I seem to have problems with the CHEMKIN format. My aim is to replace the nc7h16 chemkin data of the chemFoam tutorial with this reduced mechanism. In order to get around chemFoam crashes, I tried:
1) run dos2unix on heptanesymp159_mec.txt from [1] and change everything to uppercase
2) change unrecognized c2h3o1,2 to C2H3O1V2
3) in heptanesymp_therm.txt from [1], some lines end in "01" ... "91" although CHEMKIN format should only end in " 1" ... " 4".
I have replaced each of those 01...91 with " 1", not aware of the implications.

After these changes chemFoam runs without error messages. But the timing is delayed compared to the validation results included in the tutorial.
I assume that my changes 2) and 3) describe other conditions than the original mechanism.

How can I correctly represent "c2h3o1,2" in chemFoam?
What is the meaning of the endings "01" ... "09" in the thermodynamic data, and how do I translate this for chemFoam?

Thank you


I am running Openfoam 2.2.2.
kriete is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Utilise reduced kinetics mechanism (ARM19 etc.) clarkie_49 FLUENT 7 September 11, 2019 15:06
Chemkin mechanism import of surface chemistry Claud FLUENT 2 August 5, 2013 08:03
FLUENT13.0 imports CHEMKIN mechanism adsl17754 FLUENT 0 May 12, 2013 03:00
using reduced mechanisms in openFOAM Alish1984 OpenFOAM Running, Solving & CFD 4 August 17, 2012 06:26
unit conversion of pre-exponential factor A of chemkin mechanism in Fluent newbie FLUENT 5 November 14, 2010 05:44

All times are GMT -4. The time now is 04:28.