Running 3D Adaptive mesh in parallel interDyMFoam

Santiago · January 10, 2014, 17:38

Howdy Foamers,

So I am currently trying the adaptive mesh capabilities in interDyMFoam. So far,
I have met with what it could be an issue. The problem is that every time I run my
case (a spillway) in parallel, the dynamicRefinefvMesh seems to refine only regions
close to the boundaries, instead of all of the interface (bounds: alpha1 [0.01,0.99]).
It seems that the dynamicRefinefvMesh class only works in serial (or, at least the
tutorial cases work) but I cannot afford to run my case in serial.

In short, what I want to know is if the adaptive refinement only works in serial. If
not true, what I might be doing wrong.

any help is kindly appreciated,

Santiago

The case>

Code:

http://speedy.sh/ySn85/Spillway.tar.gz

olivierG · January 13, 2014, 04:08

hello,

Adaptive refinement work in parallel.
Take a look at your dynamicMeshDict file. There check your maxCells value. If maxCells is too low, this will stop the adaptive refinement.

regards,
olivier

Santiago · January 13, 2014, 11:43

Hi Olivier,

I put a value of 20e6 for maxCells, and still is not refining. (I am using OF 2.2.2).
Do not know what is going wrong.

thanks,

S

January 10, 2014, 17:38	Running 3D Adaptive mesh in parallel interDyMFoam	#1
Santiago Senior Member Santiago Lopez Castano Join Date: Nov 2012 Posts: 354 Rep Power: 15	Howdy Foamers, So I am currently trying the adaptive mesh capabilities in interDyMFoam. So far, I have met with what it could be an issue. The problem is that every time I run my case (a spillway) in parallel, the dynamicRefinefvMesh seems to refine only regions close to the boundaries, instead of all of the interface (bounds: alpha1 [0.01,0.99]). It seems that the dynamicRefinefvMesh class only works in serial (or, at least the tutorial cases work) but I cannot afford to run my case in serial. In short, what I want to know is if the adaptive refinement only works in serial. If not true, what I might be doing wrong. any help is kindly appreciated, Santiago The case> Code: http://speedy.sh/ySn85/Spillway.tar.gz

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OF 2.0.1 parallel running problems	moser_r	OpenFOAM Running, Solving & CFD	9	July 27, 2022 03:15
Case running in serial, but Parallel run gives error	atmcfd	OpenFOAM Running, Solving & CFD	18	March 26, 2016 12:40
Something weird encountered when running OpenFOAM in parallel on multiple nodes	xpqiu	OpenFOAM Running, Solving & CFD	2	May 2, 2013 04:59
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 11:55
How to control Minximum mesh space?	hung	FLUENT	7	April 18, 2005 09:38

January 13, 2014, 04:08		#2
olivierG Senior Member Olivier Join Date: Jun 2009 Location: France, grenoble Posts: 272 Rep Power: 17	hello, Adaptive refinement work in parallel. Take a look at your dynamicMeshDict file. There check your maxCells value. If maxCells is too low, this will stop the adaptive refinement. regards, olivier

January 13, 2014, 11:43		#3
Santiago Senior Member Santiago Lopez Castano Join Date: Nov 2012 Posts: 354 Rep Power: 15	Hi Olivier, I put a value of 20e6 for maxCells, and still is not refining. (I am using OF 2.2.2). Do not know what is going wrong. thanks, S

Running 3D Adaptive mesh in parallel *interDyMFoam*

Running 3D Adaptive mesh in parallel interDyMFoam