CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Running, Solving & CFD (https://www.cfd-online.com/Forums/openfoam-solving/)
-   -   Errors running interDyMFoam (https://www.cfd-online.com/Forums/openfoam-solving/130972-errors-running-interdymfoam.html)

Prosper March 6, 2014 14:00
Errors running interDyMFoam
 
Hi All,

I am running a 2D bubble rising problem with interDyMFoam, but I get the following error after I run 'interDyMFoam'. There seems to be no problem when I run 'blockMesh' and 'setFields'.

Can any1 tell me what could be wrong with my code? Thanks a lot!

Best,

Code:
Selected 104 cells for refinement out of 2048.
Refined from 2048 to 2776 cells.
#0  Foam::error::printStack(Foam::Ostream&) in "/opt/openfoam211/platforms/linuxGccDPOpt/lib/libOpenFOAM.so"
#1  Foam::sigSegv::sigHandler(int) in "/opt/openfoam211/platforms/linuxGccDPOpt/lib/libOpenFOAM.so"
#2  Uninterpreted:
#3  Foam::dynamicRefineFvMesh::refine(Foam::List<int> const&) in "/opt/openfoam211/platforms/linuxGccDPOpt/lib/libdynamicFvMesh.so"
#4  Foam::dynamicRefineFvMesh::update() in "/opt/openfoam211/platforms/linuxGccDPOpt/lib/libdynamicFvMesh.so"
#5 
 in "/opt/openfoam211/platforms/linuxGccDPOpt/bin/interDyMFoam"
#6  __libc_start_main in "/lib/tls/i686/cmov/libc.so.6"
#7 
 in "/opt/openfoam211/platforms/linuxGccDPOpt/bin/interDyMFoam"
Segmentation fault

nimasam March 9, 2014 09:38
dynamic mesh refinements does not support 2D case

Prosper March 10, 2014 09:24
Quote:
Originally Posted by nimasam (Post 479014)
dynamic mesh refinements does not support 2D case
Thanks Nima.

I'm surprised to know that. If OpenFoam can do 3D refinement isn't 2D easier?

Best,

nimasam March 10, 2014 09:31
a little search, you will find some references which implemented 2D refinement in OpenFOAM


All times are GMT -4. The time now is 22:30.