|
[Sponsors] |
May 18, 2014, 13:02 |
FSI and Mapping Fields
|
#1 |
Senior Member
Join Date: Sep 2013
Posts: 353
Rep Power: 20 |
Hi,
I am trying to do basic Fluid Structure interaction (FSI) simulations. In my case deformation and shear forces are quite insignificant. So it came to mind to map the pressure field from my interfoam simulations to soliddisplacementfoam. For the steady state version this seems quite straight forward. I'd just use mapFields to move my pressure field from one mesh to the other. Is the same possible for a time varying pressure field? Has anyone ever tried this and could give me some pointers? Best regards and thanks in advance for any reply |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
About 2 Way FSI (CFX+ANSYS Mechanical) | shreyasr | ANSYS | 2 | November 7, 2012 13:30 |
Mapping method in FSI | Mina_Shahi | CFX | 9 | January 9, 2012 11:48 |
Structural force in FSI mapping Fluent 12.0 | benjamon | FLUENT | 1 | October 24, 2011 10:32 |
FSI - verification force mapping with mfx | Vinzent | CFX | 15 | September 18, 2011 18:00 |
FSI - Importing load (Mapping) | moonomid | CFX | 0 | June 3, 2011 11:33 |