CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

Moving Mesh (dynamicMesh)

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 31, 2014, 02:22
Default Moving Mesh (dynamicMesh)
  #1
New Member
 
Shantanu Kale
Join Date: Dec 2013
Posts: 25
Rep Power: 8
shantanukale is on a distinguished road
Hello...
Kindly suggest some good suggested readings for dynamic mesh utility. I am simulating flow over cylinder and I want to oscillate the cylinder. I have found oscillating boundary condition, but that is the other way round. I want the cyilnder to be oscillating.

Thank You.
shantanukale is offline   Reply With Quote

Old   June 3, 2014, 05:05
Default
  #2
Senior Member
 
Onno
Join Date: Jan 2012
Location: Germany
Posts: 120
Rep Power: 11
Kaskade is on a distinguished road
I haven't used it yet, but I think you might need ACMI: http://openfoam.org/version2.3.0/ami.php

And have a look at the tutorial.
Kaskade is offline   Reply With Quote

Old   June 3, 2014, 06:47
Default
  #3
New Member
 
Shantanu Kale
Join Date: Dec 2013
Posts: 25
Rep Power: 8
shantanukale is on a distinguished road
Thank You.....
I am using OF 221. However, I could not find ACMI in my version. Any other alternative?

Thanks a lot in advance..
shantanukale is offline   Reply With Quote

Old   June 3, 2014, 06:54
Default
  #4
Senior Member
 
Onno
Join Date: Jan 2012
Location: Germany
Posts: 120
Rep Power: 11
Kaskade is on a distinguished road
That's because ACMI was added with 2.3. Just install it alongside 2.2.1. It doesn't replace your old installation.
Kaskade is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to set periodic boundary conditions Ganesh FLUENT 14 November 26, 2018 11:26
[snappyHexMesh] SnappyHexMesh for internal Flow vishwa OpenFOAM Meshing & Mesh Conversion 24 June 27, 2016 08:54
How to let the mesh motion solver just solve a small region near a moving boundary? zhajingjing OpenFOAM Running, Solving & CFD 9 April 28, 2016 04:15
snappyhexmesh remove blockmesh geometry philipp1 OpenFOAM Running, Solving & CFD 2 December 12, 2014 10:58
[snappyHexMesh] external flow with snappyHexMesh chelvistero OpenFOAM Meshing & Mesh Conversion 11 January 15, 2010 19:43


All times are GMT -4. The time now is 23:43.