CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Running, Solving & CFD (https://www.cfd-online.com/Forums/openfoam-solving/)
-   -   Continuously changing Wave conditions (https://www.cfd-online.com/Forums/openfoam-solving/140065-continuously-changing-wave-conditions.html)

Shabirmean August 7, 2014 07:09

Continuously changing Wave conditions
 
I am trying to simulate a continuous flow of shallow Water Waves.

I am trying to do it using the shallowWaterFoam solver. I see that it has been set only for an initial velocity of 0.1 m/s at the inlet boundary. Also the initial water volume height is set to a uniform value.

What I want is to continuously set velocity values for each cell at the boundary and do the calculation for the current wave heights, thus simulating a continuous water flow which does not fade in 100s.

Is there any feature to enable this capability in OPENFOAM or any examples???


All times are GMT -4. The time now is 10:46.