|
[Sponsors] |
October 10, 2014, 08:21 |
Can't change liquid in sprayfoam
|
#1 |
New Member
Na
Join Date: Sep 2014
Posts: 5
Rep Power: 11 |
Hello!
I have a problem changing fluid from C7H16 to C14H30 in sprayFoam. I modified SprayCloudProperties, thermophysicalProperties and chem.imp files. If liquid is chanced to C6H14 solver starts to run just fine, bur if liquid is changed to C14H30 OpenFoam gives an error message attached below. These files: - C14H30.C - C14H30.H - C14H30I.H is located at opt/openfoam211/scr/thermophysicalModels/properties/liquidProperties/C14H30 Do I need to copy these files to some place or do something else? Any help or comment is very welcome! Thanks, Eranho Code:
1] From function HashTable<T, Key, Hash>::operator[](const Key&) [1] in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/OpenFOAM/lnInclude/HashTableI.H at line 117. [1] FOAM parallel run exiting [1] [0] [0] [0] --> FOAM FATAL ERROR: [0] C14H30 not found in table. Valid entries: 820 ( CL3SISICL A2C2HB* SIF3NH2 C2H3O GAET2 CACL2 SIF3NH H2GAME NA2O2 BEO(B) H2CCHO FNNF and so on.. |
|
October 11, 2014, 04:18 |
|
#2 |
New Member
Na
Join Date: Sep 2014
Posts: 5
Rep Power: 11 |
Solved!
just added C14H30 properties to therm.dat file, ones I realized that they are missing. -Eranho |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Solid/liquid phase change | fabian_roesler | OpenFOAM | 10 | December 24, 2012 06:37 |
Change cell zone index/thread during simulation | neilduffy1024 | FLUENT | 0 | January 17, 2011 09:40 |
interDyMFoam - change in volume fraction | gopala | OpenFOAM Running, Solving & CFD | 0 | April 27, 2009 10:46 |
no enthalpy change across the momentum source | Atit Koonsrisuk | CFX | 2 | December 19, 2005 02:33 |
entrainment of droplets from liquid surface | Elisabeth A. Hove | Siemens | 0 | October 16, 2002 10:11 |