Foam Fatal error running icoFsiFoam

ricardo1987 · November 15, 2014, 13:47

Hi everyone,

I am having trouble running icoFsiFoam. I get the following error shown while running it in the fluid directory:

--> FOAM FATAL ERROR:
Cannot find file "points" in directory "constant/solid/polyMesh"

From function Time::findInstance(const fileName&, const word&, const IOobject::readOption)
in file db/Time/findInstance.C at line 148.

FOAM exiting

I have ran blockMesh in both, the solid and the fluid directory. Also ran checkMesh on both resulting in "mesh ok". I have also checked that the points file is in the solid directory as well as in the fluid...
I have not been able to find related information, im kind of lost here... any ideas?
Thanks a lot in advance for your reply,
Ricardo

hchen · November 17, 2014, 14:12

Hi,

Did you run make links?

Best regards
Hao

anufagbemi · January 18, 2018, 13:05

Had the same problem. please has anyone been able to solve the problem? All my links are in place.

Thanks
Samuel

xena · March 28, 2019, 14:47

hi sam
if you could solve the problem, please tell me what you did, because I'm facing the same issue even though I did all the steps

November 15, 2014, 13:47	Foam Fatal error running icoFsiFoam	#1
ricardo1987 New Member ricardo avila Join Date: Nov 2014 Posts: 1 Rep Power: 0	Hi everyone, I am having trouble running icoFsiFoam. I get the following error shown while running it in the fluid directory: --> FOAM FATAL ERROR: Cannot find file "points" in directory "constant/solid/polyMesh" From function Time::findInstance(const fileName&, const word&, const IOobject::readOption) in file db/Time/findInstance.C at line 148. FOAM exiting I have ran blockMesh in both, the solid and the fluid directory. Also ran checkMesh on both resulting in "mesh ok". I have also checked that the points file is in the solid directory as well as in the fluid... I have not been able to find related information, im kind of lost here... any ideas? Thanks a lot in advance for your reply, Ricardo

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[blockMesh] error message with modeling a cube with a hold at the center	hsingtzu	OpenFOAM Meshing & Mesh Conversion	2	March 14, 2012 10:56
[blockMesh] BlockMesh FOAM warning	gaottino	OpenFOAM Meshing & Mesh Conversion	7	July 19, 2010 15:11
[blockMesh] Axisymmetrical mesh	Rasmus Gjesing (Gjesing)	OpenFOAM Meshing & Mesh Conversion	10	April 2, 2007 15:00
[Gmsh] Import gmsh msh to Foam	adorean	OpenFOAM Meshing & Mesh Conversion	24	April 27, 2005 09:19
error while compiling the USER Sub routine	CFD user	CFX	3	November 25, 2002 16:16

November 17, 2014, 14:12		#2
hchen Member Hao Chen Join Date: Aug 2014 Posts: 66 Rep Power: 0	Hi, Did you run make links? Best regards Hao

January 18, 2018, 13:05		#3
anufagbemi New Member Sam Join Date: Nov 2017 Posts: 24 Rep Power: 10	Had the same problem. please has anyone been able to solve the problem? All my links are in place. Thanks Samuel

March 28, 2019, 14:47		#4
xena New Member xena Join Date: Mar 2019 Posts: 13 Rep Power: 8	hi sam if you could solve the problem, please tell me what you did, because I'm facing the same issue even though I did all the steps