[Werne]

Hello,

I have a problem with my current simulation. I'm currently working on my thesis and I'm simulating the flow in a narrow gap.
Because my mesh is rather large I started by simulating on a coarse mesh. Now that I have some reasonable results with this coarse mesh I wanted to map the results on my fine mesh. Geometry and boundary conditions are identical.

At first I wasn't able to run mapFields for some reason. I only got this error:

werne@HAL8:/TEST_compressible_90_12_grob > mapFields ../TEST_compressible_90_12_grob_testfall/                                                        
/*---------------------------------------------------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
|  \\    /   O peration     | Version:  2.2.2                                 |
|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
|    \\/     M anipulation  |                                                 |
\*---------------------------------------------------------------------------*/
Build  : 2.2.2-9739c53ec43f                                                    
Exec   : mapFields ../TEST_compressible_90_12_grob_testfall/                
Date   : Dec 09 2014                                                            
Time   : 09:57:09                                                              
Host   : "HAL8"                                                              
PID    : 2517                                                                  
Case   : /home/****/werne/OpenFOAM/werne-2.2.2/run/Tests/TEST_compressible_90_12_grob                                                                    
nProcs : 1                                                                      
sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).              
fileModificationChecking : Monitoring run-time modified files using timeStampMaster                                                                            
allowSystemOperations : Disallowing user-supplied system call operations        

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Source: "../TEST_compressible_90_12_grob_testfall" ""                      
Target: "/home/****/werne/OpenFOAM/werne-2.2.2/run/Tests" "TEST_compressible_90_12_grob"                                                                  

Create databases as time

Source time: 0.0076
Target time: 0.0076
Create meshes      

Source mesh size: 3355290       Target mesh size: 6298122


Mapping fields for time 0.0076

    interpolating alphat
AMI: Creating addressing and weights between 45616 source faces and 45616 target faces
AMI: Patch source weights min/max/average = 0.9998914285, 1.000007218, 0.9999999413
AMI: Patch target weights min/max/average = 0.9997461169, 1.000014179, 0.9999999185
AMI: Creating addressing and weights between 25277 source faces and 25277 target faces
AMI: Patch source weights min/max/average = 0.9999990007, 1.000002493, 0.9999999489
AMI: Patch target weights min/max/average = 0.9999974194, 1.000003056, 0.9999999462
#0  Foam::error::printStack(Foam::Ostream&) at ??:?
#1  Foam::sigSegv::sigHandler(int) at ??:?
#2   in "/lib64/libc.so.6"
#3
 at ??:?
#4
 at ??:?
#5
 at ??:?
#6
 at ??:?
#7
 at ??:?
#8
 at ??:?
#9  __libc_start_main in "/lib64/libc.so.6"
#10
 at /usr/src/packages/BUILD/glibc-2.11.3/csu/../sysdeps/x86_64/elf/start.S:116
Speicherschutzverletzung
Exitcode 139

I was able to solve this problem by switching to an older version of OpenFOAM (from OF2.2.2 to OF2.2.x).
Now, I am able to map the results from the coarse to the fine mesh. There are no errors, and if I check the results with paraview, they seem reasonable. However, I'm not able to start the simulation with the mapped fields.
The simulation always stops with the following error:

werne@HAL9:/TEST_compressible_90_12_grob > rhoPimpleFoam      
/*---------------------------------------------------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
|  \\    /   O peration     | Version:  2.2.2                                 |
|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
|    \\/     M anipulation  |                                                 |
\*---------------------------------------------------------------------------*/
Build  : 2.2.2-9739c53ec43f                                                    
Exec   : rhoPimpleFoam                                                         
Date   : Dec 09 2014                                                           
Time   : 11:29:45                                                              
Host   : "HAL9"                                                              
PID    : 3796                                                                  
Case   : /home/*******/werne/OpenFOAM/werne-2.2.2/run/Tests/TEST_compressible_90_12_grob                                                                     
nProcs : 1                                                                      
sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).              
fileModificationChecking : Monitoring run-time modified files using timeStampMaster                                                                             
allowSystemOperations : Disallowing user-supplied system call operations        

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time                                                                    

Create mesh for time = 0.0076


PIMPLE: Operating solver in PISO mode

Reading thermophysical properties

Selecting thermodynamics package 
{                                
    type            hePsiThermo; 
    mixture         pureMixture; 
    transport       const;       
    thermo          hConst;      
    equationOfState perfectGas;  
    specie          specie;      
    energy          sensibleEnthalpy;
}                                    

AMI: Creating addressing and weights between 45616 source faces and 45616 target faces                                                                          
AMI: Patch source weights min/max/average = 0.9998914285, 1.000007218, 0.9999999413                                                                             
AMI: Patch target weights min/max/average = 0.9997461169, 1.000014179, 0.9999999185                                                                             
AMI: Creating addressing and weights between 25277 source faces and 25277 target faces                                                                          
AMI: Patch source weights min/max/average = 0.9999990007, 1.000002493, 0.9999999489                                                                             
AMI: Patch target weights min/max/average = 0.9999974194, 1.000003056, 0.9999999462                                                                             
Reading field U                                                                 

Reading/calculating face flux field phi

Creating turbulence model

Selecting turbulence model type RASModel
Selecting RAS turbulence model kOmegaSST
#0  Foam::error::printStack(Foam::Ostream&) at ??:?
#1  Foam::sigFpe::sigHandler(int) at ??:?          
#2   in "/lib64/libc.so.6"                         
#3  Foam::divide(Foam::Field<double>&, Foam::UList<double> const&, Foam::UList<double> const&) at ??:?                                                          
#4  void Foam::divide<Foam::fvPatchField, Foam::volMesh>(Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh>&, Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&) at ??:?                                              
#5  Foam::tmp<Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> > Foam::operator/<Foam::fvPatchField, Foam::volMesh>(Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&) at ??:?
#6  Foam::compressible::RASModels::kOmegaSST::F2() const at ??:?
#7  Foam::compressible::RASModels::kOmegaSST::F23() const at ??:?
#8  Foam::compressible::RASModels::kOmegaSST::kOmegaSST(Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<Foam::Vector<double>, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh> const&, Foam::fluidThermo const&, Foam::word const&, Foam::word const&) at ??:?
#9  Foam::compressible::RASModel::adddictionaryConstructorToTable<Foam::compressible::RASModels::kOmegaSST>::New(Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<Foam::Vector<double>, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh> const&, Foam::fluidThermo const&, Foam::word const&) at ??:?
#10  Foam::compressible::RASModel::New(Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<Foam::Vector<double>, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh> const&, Foam::fluidThermo const&, Foam::word const&) at ??:?
#11  Foam::compressible::turbulenceModel::addturbulenceModelConstructorToTable<Foam::compressible::RASModel>::NewturbulenceModel(Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<Foam::Vector<double>, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh> const&, Foam::fluidThermo const&, Foam::word const&) at ??:?
#12  Foam::compressible::turbulenceModel::New(Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<Foam::Vector<double>, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh> const&, Foam::fluidThermo const&, Foam::word const&) at ??:?
#13
 at ??:?
#14  __libc_start_main in "/lib64/libc.so.6"
#15
 at /usr/src/packages/BUILD/glibc-2.11.3/csu/../sysdeps/x86_64/elf/start.S:116
Fließkommafehler
Exitcode 136

What does this error mean? Is it possible that it is caused by using a different version of OpenFOAM for mapping and for solving?