|
[Sponsors] |
May 2, 2015, 06:39 |
Adding SRF to multiphase solvers
|
#1 |
Member
Victor Koppejan
Join Date: May 2015
Posts: 40
Rep Power: 11 |
Hi Everyone,
I'm looking into OF as an alternative to Fluent, which I use at the moment. My case is a liquid-solid expanded bed (eg homogenous fluidized bed) with a rotatiing sparger at the bottom from where liquid enters the multiphase domain. In Fluent I used a single rotating reference frame with an eulerian multiphase solver. Rotation speeds are < 30 rpm. I've been looking around and I think this can be done via fvoptions. Does one of you have experience (good or bad) with this approach? Thank you for your help. Kind regards, Victor |
|
January 14, 2016, 00:17 |
rotating fluid with srf
|
#2 |
New Member
farahidayu
Join Date: Aug 2010
Posts: 20
Rep Power: 16 |
Hi Victor! I am interested in your simulation with rotating fluid with srf. Did you find the solution for your case? Did you manage to rotate the fluid with srf? How srf differs compared to mrf?
Ayu |
|
January 15, 2016, 07:26 |
|
#3 |
Member
Victor Koppejan
Join Date: May 2015
Posts: 40
Rep Power: 11 |
Hi Farahiam,
I have not pursued this option further, for the moment I'm focusing more on the multiphase aspect. Once that's done I'll return to the SRF. Regards, Victor |
|
September 20, 2020, 10:54 |
|
#4 | |
New Member
Join Date: Aug 2020
Posts: 16
Rep Power: 6 |
Quote:
i need to implement reference frame with multiphase flow for my master thesis and I would like to ask if you have found a solution for your problem. Obviously it has been a while but maybe you are still on the forum Thanks, Ayca |
||
Tags |
srf, twophaseeulerfoam |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
chtMultiRegionSimpleFoam | samiam1000 | OpenFOAM Running, Solving & CFD | 39 | March 31, 2016 09:43 |
Adding porous zones to compressible multiphase solvers | Hisham | OpenFOAM Programming & Development | 8 | November 27, 2015 06:14 |
yPlusRAS & yPlusLES doesn't work for multiphase Solvers (e.g. twoLiquidMixingFoam) | cfdonline2mohsen | OpenFOAM Post-Processing | 3 | July 20, 2014 14:30 |
Possible turbulence modelling bug in SRF solvers | otm | OpenFOAM Running, Solving & CFD | 3 | May 29, 2012 05:03 |
Multiphase solvers Theory | titio | OpenFOAM Running, Solving & CFD | 1 | November 20, 2009 18:23 |