| Sam_CFD |
June 9, 2015 01:41 |
error:Killed during interFOAM simulation
Dear Foamers,
I am simulating an injector with interFOAM. I got the following error.
Code:
/*---------------------------------------------------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: 2.3.1 |
| \\ / A nd | Web: www.OpenFOAM.org |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
Build : 2.3.1-262087cdf8db
Exec : interFoam
Date : Jun 08 2015
Time : 19:59:46
Host : "KOR1031100VM"
PID : 17288
Case : /home/sml7kor/OpenFOAM/sml7kor-2.3.1/run/HDEV_5_FinetoCoarse_Test
nProcs : 1
sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).
fileModificationChecking : Monitoring run-time modified files using timeStampMaster
allowSystemOperations : Allowing user-supplied system call operations
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time
Create mesh for time = 0
PIMPLE: Operating solver in PISO mode
Reading field p_rgh
Reading field U
Reading/calculating face flux field phi
Reading transportProperties
Selecting incompressible transport model Newtonian
Selecting incompressible transport model Newtonian
Selecting turbulence model type RASModel
Selecting RAS turbulence model kOmegaSST
Killed
sml7kor@KOR1031100VM:~/OpenFOAM/sml7kor-2.3.1/run/HDEV_5_FinetoCoarse_Test$ interFoam
/*---------------------------------------------------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: 2.3.1 |
| \\ / A nd | Web: www.OpenFOAM.org |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
Build : 2.3.1-262087cdf8db
Exec : interFoam
Date : Jun 08 2015
Time : 20:01:56
Host : "KOR1031100VM"
PID : 17310
Case : /home/sml7kor/OpenFOAM/sml7kor-2.3.1/run/HDEV_5_FinetoCoarse_Test
nProcs : 1
sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).
fileModificationChecking : Monitoring run-time modified files using timeStampMaster
allowSystemOperations : Allowing user-supplied system call operations
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time
Create mesh for time = 0
PIMPLE: Operating solver in PISO mode
Reading field p_rgh
Reading field U
Reading/calculating face flux field phi
Reading transportProperties
Selecting incompressible transport model Newtonian
Selecting incompressible transport model Newtonian
Selecting turbulence model type RASModel
Selecting RAS turbulence model kOmegaSST
Killed
Please help me to address this issue.
Regards,
Sam |
