bubble rising grid study problem!

mreza_cfd · July 15, 2015, 08:50

Dear Foam Users,

I did a simple run: 2d bubble rising with solver interFoam.

The problem is that when I run on a finer mesh, the results have more error with comparison to Hysing et al.*

Do you know why?!

You can see the code and results in attachment.

Thanks a lot in advance!

guddu_jnk · August 12, 2019, 04:39

Quote:

Originally Posted by mreza_cfd

Dear Foam Users,

I did a simple run: 2d bubble rising with solver interFoam.

The problem is that when I run on a finer mesh, the results have more error with comparison to Hysing et al.*

Do you know why?!

You can see the code and results in attachment.

Thanks a lot in advance!

when i run your programming , then the bubble stays at one place it doesnot move upward.
why this is so?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Shear rate distribution around rising bubble	Agis	Fluent Multiphase	0	June 29, 2015 04:19
Grid and time step independence study	ndabir	FLUENT	4	February 16, 2015 16:40
having problems with performing grid convergence study in SWFS	drdet	FloEFD, FloWorks & FloTHERM	12	January 22, 2015 04:44
Problem of simulating shape oscillations of Bubble - Multiphase flow	akash	FLUENT	2	January 29, 2013 13:46
Problem with Grid convergence study	dialolema	CFX	1	June 14, 2010 18:33