Air conditioning simulation

sharonyue · July 16, 2015, 04:09

Hello guys,

Im not the expert on HVAC. I have a small confusion about air conditioning simulations.

As we know I have two options:

1. Use buoyantBoussinesqFoam;
2. Implement TEqn into piso/simpleFoam;

I know that when the cooling air was injected into the closed house. Most of the temperature changes come from "the cooling air was injected into it".

So I think the buoyant force might be neglected(also gravity). I mean this is not to simulate hot room heated by a hot steel(buoyant force is a must).

So do u think I can choose method 2 to simulate air conditioning system?
Best,

tian · July 17, 2015, 04:09

Hi,

in your case use buoyantBoussinesqSimpleFoam.

Bye
Thomas

July 16, 2015, 04:09	Air conditioning simulation	#1
sharonyue Senior Member Dongyue Li Join Date: Jun 2012 Location: Beijing, China Posts: 861 Rep Power: 19	Hello guys, Im not the expert on HVAC. I have a small confusion about air conditioning simulations. As we know I have two options: 1. Use buoyantBoussinesqFoam; 2. Implement TEqn into piso/simpleFoam; I know that when the cooling air was injected into the closed house. Most of the temperature changes come from "the cooling air was injected into it". So I think the buoyant force might be neglected(also gravity). I mean this is not to simulate hot room heated by a hot steel(buoyant force is a must). So do u think I can choose method 2 to simulate air conditioning system? Best, __________________ My OpenFOAM algorithm website: http://dyfluid.com By far the largest Chinese CFD-based forum: http://www.cfd-china.com/category/6/openfoam We provide lots of clusters to Chinese customers, and we are considering to do business overseas: http://dyfluid.com/DMCmodel.html

July 17, 2015, 04:09		#2
tian Senior Member Tian Join Date: Mar 2009 Location: Berlin, germany Posts: 123 Rep Power: 18	Hi, in your case use buoyantBoussinesqSimpleFoam. Bye Thomas __________________ BIM HVACTool, The Green Building Simulation Tool for OpenFOAM, Energy Plus and Radiance.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
air entrainment simulation	zhongdong	FLUENT	1	July 20, 2016 07:47
Condition of Air velocity in Open Channel simulation	wes1204	OpenFOAM Running, Solving & CFD	0	May 9, 2014 06:08
problem is modeling and simulation of an air foil	alnabhani	CFX	4	December 2, 2010 14:24
Improve accuracy on air foil blade simulation?	Bian	CFX	4	December 12, 2006 12:29
air jet simulation	Yue zou	Main CFD Forum	0	September 28, 1998 09:30