CFD Online Discussion Forums - InterDyMFoam+simpleFunctionObject

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)

- OpenFOAM Running, Solving & CFD (https://www.cfd-online.com/Forums/openfoam-solving/)

- - InterDyMFoam+simpleFunctionObject (https://www.cfd-online.com/Forums/openfoam-solving/160058-interdymfoam-simplefunctionobject.html)

InterDyMFoam+simpleFunctionObject

Hi,

I am simulating drop falling by interDyMFoam and since I need to read dop velocity I use swakExpression. I sed it in interFoam and that worked perfectly but now whenever I execute interDyMFoam an error apprears saying that

It seems that the method simpleFunctionObject::updateMesh is not properly implemented (neither in the class or any appropriate subclasses).
If you think that it should work anyway add the entry

ignore_unimplemented_simpleFunctionObject::updateM esh true;

the following is the whole errors:

Create time

Create mesh for time = 0

Selecting dynamicFvMesh dynamicRefineFvMesh

PIMPLE: Operating solver in PISO mode

Reading field p_rgh

Reading field U

Reading/calculating face flux field phi

Reading transportProperties

Selecting incompressible transport model Newtonian
Selecting incompressible transport model Newtonian
Selecting turbulence model type laminar

Reading g
Calculating field g.h

No finite volume options present

GAMG: Solving for pcorr, Initial residual = 0, Final residual = 0, No Iterations 0
time step continuity errors : sum local = 0, global = 0, cumulative = 0
Reading/calculating face velocity Uf

Courant Number mean: 0 max: 0

Starting time loop

swak4Foam: Setting default mesh
[13] swak4Foam: Allocating new repository for sampledSurfaces
[14] swak4Foam: Allocating new repository for sampledSurfaces
[3] swak4Foam: Allocating new repository for sampledSurfaces
[4] swak4Foam: Allocating new repository for sampledSurfaces
[5] swak4Foam: Allocating new repository for sampledSurfaces
[6] swak4Foam: Allocating new repository for sampledSurfaces
[8] swak4Foam: Allocating new repository for sampledSurfaces
[10] swak4Foam: Allocating new repository for sampledSurfaces
[11] swak4Foam: Allocating new repository for sampledSurfaces
[12] swak4Foam: Allocating new repository for sampledSurfaces
[15] swak4Foam: Allocating new repository for sampledSurfaces
[1] swak4Foam: Allocating new repository for sampledSurfaces
[2] swak4Foam: Allocating new repository for sampledSurfaces
[7] swak4Foam: Allocating new repository for sampledSurfaces
[9] swak4Foam: Allocating new repository for sampledSurfaces
[0] swak4Foam: Allocating new repository for sampledSurfaces
Interface Courant Number mean: 0 max: 0
Courant Number mean: 0 max: 0
deltaT = 0.001176471
Time = 0.001176471

Selected 158 cells for refinement out of 10000.
Refined from 10000 to 11106 cells.
[8]
[8]
[8] --> FOAM FATAL ERROR:
[8] Not implemented
[8]
[8] From function simpleFunctionObject::updateMesh
[8] in file helpers/switchableNotImplemented.C at line 85.
[8]
FOAM parallel run aborting
[8]
[13]
[13]
[13] --> FOAM FATAL ERROR:
[13] Not implemented
[13]
[13] From function simpleFunctionObject::updateMesh
[13] in file helpers/switchableNotImplemented.C at line 85.
[13]
FOAM parallel run aborting
[13]
[14]
[14]
[14] --> FOAM FATAL ERROR:
[14] Not implemented
[14]
[14] From function simpleFunctionObject::updateMesh
[14] in file helpers/switchableNotImplemented.C at line 85.
[14]
FOAM parallel run aborting
[14]
[3]
[3]
[3] --> FOAM FATAL ERROR:
[3] Not implemented
[3]
[3] From function simpleFunctionObject::updateMesh
[3] in file helpers/switchableNotImplemented.C at line 85.
[3]
FOAM parallel run aborting
[3]
[5]
[5]
[5] --> FOAM FATAL ERROR:
[5] Not implemented
[5]
[5] From function simpleFunctionObject::updateMesh
[5] in file helpers/switchableNotImplemented.C at line 85.
[5]
FOAM parallel run aborting
[5]
[6]
[6]
[6] --> FOAM FATAL ERROR:
[6] Not implemented
[6]
[6] From function simpleFunctionObject::updateMesh
[6] in file helpers/switchableNotImplemented.C at line 85.
[6]
FOAM parallel run aborting
[6]
[4]
[4]
[4] --> FOAM FATAL ERROR:
[4] Not implemented
[4]
[4] From function simpleFunctionObject::updateMesh
[4] in file helpers/switchableNotImplemented.C at line 85.
[4]
FOAM parallel run aborting
[4]
[7]
[7]
[7] --> FOAM FATAL ERROR:
[7] Not implemented
[7]
[7] From function simpleFunctionObject::updateMesh
[7] in file helpers/switchableNotImplemented.C at line 85.
[7]
FOAM parallel run aborting
[7]
[9]
[9]
[9] --> FOAM FATAL ERROR:
[9] Not implemented
[9]
[9] From function simpleFunctionObject::updateMesh
[9] in file helpers/switchableNotImplemented.C at line 85.
[9]
FOAM parallel run aborting
[9]
[10]
[10]
[10] --> FOAM FATAL ERROR:
[10] Not implemented
[10]
[10] From function simpleFunctionObject::updateMesh
[10] in file helpers/switchableNotImplemented.C at line 85.
[10]
FOAM parallel run aborting
[10]
[11]
[11]
[11] --> FOAM FATAL ERROR:
[11] Not implemented
[11]
[11] From function simpleFunctionObject::updateMesh
[11] in file helpers/switchableNotImplemented.C at line 85.
[11]
FOAM parallel run aborting
[11]
[12]
[12]
[12] --> FOAM FATAL ERROR:
[12] Not implemented
[12]
[12] From function simpleFunctionObject::updateMesh
[12] in file helpers/switchableNotImplemented.C at line 85.
[12]
FOAM parallel run aborting
[12]
[15]
[15]
[15] --> FOAM FATAL ERROR:
[15] Not implemented
[15]
[15] From function simpleFunctionObject::updateMesh
[15] in file helpers/switchableNotImplemented.C at line 85.
[15]
FOAM parallel run aborting
[15]

It seems that the method simpleFunctionObject::updateMesh is not properly implemented (neither in the class or any appropriate subclasses).
If you think that it should work anyway add the entry

ignore_unimplemented_simpleFunctionObject::updateM esh true;

[1]
[1]
[1] --> FOAM FATAL ERROR:
[1] Not implemented
[1]
[1] From function simpleFunctionObject::updateMesh
[1] in file helpers/switchableNotImplemented.C at line 85.
[1]
FOAM parallel run aborting
[1]
[2]
[2]
[2] --> FOAM FATAL ERROR:
[2] Not implemented
[2]
[2] From function simpleFunctionObject::updateMesh
[2] in file helpers/switchableNotImplemented.C at line 85.
[2]
FOAM parallel run aborting
[2]
to the dictionary "/home/elham/OpenFOAM/elham-2.3.0/run/droplet/interDyMFoam/drolpet3/system/controlDict.functions.downAverage" and we will go on. Alternativly properly implement the method.

Anyway: I'll go die now

--------------------------------------------------------------------------
MPI_ABORT was invoked on rank 3 in communicator MPI_COMM_WORLD
with errorcode 1.

NOTE: invoking MPI_ABORT causes Open MPI to kill all MPI processes.
You may or may not see output from other processes, depending on
exactly when Open MPI kills them.
--------------------------------------------------------------------------

mpirun has exited due to process rank 3 with PID 15379 on
node elham-Precision-T7610 exiting improperly. There are two reasons this could occur:

1. this process did not call "init" before exiting, but others in
the job did. This can cause a job to hang indefinitely while it waits
for all processes to call "init". By rule, if one process calls "init",
then ALL processes must call "init" prior to termination.

2. this process called "init", but exited without calling "finalize".
By rule, all processes that call "init" MUST call "finalize" prior to
exiting or it will be considered an "abnormal termination"

This may have caused other processes in the application to be
terminated by signals sent by mpirun (as reported here).
--------------------------------------------------------------------------
[elham-Precision-T7610:15371] 14 more processes have sent help message help-mpi-api.txt / mpi-abort
[elham-Precision-T7610:15371] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages

Thanks in advance for any help.

Hi Elham,

I met the same problem as yours when using compressibleInterDyMFoam, have you found some solution to this problem?

Best regards!

Big Orange

Quote:

Originally Posted by bigorange (Post 645492)

Hi Elham,

I met the same problem as yours when using compressibleInterDyMFoam, have you found some solution to this problem?

Best regards!

Big Orange

As it is for long time ago I don't remember how I fix it. Do you run in parallel? Does the error is the same when you don't run in parallel?

Quote:

Originally Posted by Elham (Post 645495)

As it is for long time ago I don't remember how I fix it. Do you run in parallel? Does the error is the same when you don't run in parallel?

Hi Elham,

Thanks for your reply.

I didn't run compressibleInterDyMFoam in parallel.

In my point of view, the reason for this error is that simpleFunctionObject::updateMesh in swak4Foam doesn't suit to the adaptive mesh refinement solver.

Would you please give me some clue to resolve this problem?

The following is the content in the log file.

Code:

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //

Create time



Create mesh for time = 0



Selecting dynamicFvMesh dynamicRefineFvMesh



PIMPLE: Operating solver in PISO mode



Reading field p_rgh



Reading field U



Reading/calculating face flux field phi



Constructing twoPhaseMixtureThermo



Selecting thermodynamics package 

{

    type            heRhoThermo;

    mixture         pureMixture;

    transport       const;

    thermo          hConst;

    equationOfState perfectFluid;

    specie          specie;

    energy          sensibleInternalEnergy;

}



Selecting thermodynamics package 

{

    type            heRhoThermo;

    mixture         pureMixture;

    transport       const;

    thermo          hConst;

    equationOfState perfectGas;

    specie          specie;

    energy          sensibleInternalEnergy;

}



Reading thermophysical properties





Reading g



Reading hRef

Calculating field g.h



Selecting turbulence model type laminar

Creating field kinetic energy K



Reading/calculating face velocity Uf



Courant Number mean: 0 max: 0



Starting time loop



--> FOAM Warning : 

    From function simpleFunctionObject::simpleFunctionObject

    in file simpleFunctionObject/simpleFunctionObject.C at line 118

    'outputControlMode' not found in patchP_rgh

Assuming: timeStep

--> FOAM Warning : 

    From function simpleFunctionObject::simpleFunctionObject

    in file simpleFunctionObject/simpleFunctionObject.C at line 127

    'outputInterval' not found in patchP_rgh

Assuming: 1

--> FOAM Warning : 

    From function timelineFunctionObject::timelineFunctionObject

    in file timelineFunctionObject/timelineFunctionObject.C at line 88

    No entry 'writeStartTime' in "/home/jcwang/OpenFOAM/jcwang-4.1/run/dambreak/adaptiveMeshRefinment/workOnSwak/system/controlDict.functions.patchP_rgh". Assuming 'no'

--> FOAM Warning : 

    From function simpleFunctionObject::simpleFunctionObject

    in file simpleFunctionObject/simpleFunctionObject.C at line 118

    'outputControlMode' not found in patchP

Assuming: timeStep

--> FOAM Warning : 

    From function simpleFunctionObject::simpleFunctionObject

    in file simpleFunctionObject/simpleFunctionObject.C at line 127

    'outputInterval' not found in patchP

Assuming: 1

--> FOAM Warning : 

    From function timelineFunctionObject::timelineFunctionObject

    in file timelineFunctionObject/timelineFunctionObject.C at line 88

    No entry 'writeStartTime' in "/home/jcwang/OpenFOAM/jcwang-4.1/run/dambreak/adaptiveMeshRefinment/workOnSwak/system/controlDict.functions.patchP". Assuming 'no'

Courant Number mean: 0 max: 0

deltaT = 0.0011904762

Time = 0.00119047619



Selected 1920 cells for refinement out of 32256.

Refined from 32256 to 45696 cells.





It seems that the method simpleFunctionObject::updateMesh is not properly implemented (neither in the class or  any appropriate subclasses).

If you think that it should work anyway add the entry



ignore_unimplemented_simpleFunctionObject::updateMesh true;



to the dictionary "/home/jcwang/OpenFOAM/jcwang-4.1/run/dambreak/adaptiveMeshRefinment/workOnSwak/system/controlDict.functions.patchP_rgh" and we will go on. Alternativly properly implement the method.



Anyway: I'll go die now







--> FOAM FATAL ERROR: 

Not implemented



    From function simpleFunctionObject::updateMesh

    in file helpers/switchableNotImplemented.C at line 85.



FOAM aborting



#0  Foam::error::printStack(Foam::Ostream&) at ??:?

#1  Foam::error::abort() at ??:?

#2  Foam::switchableNotImplemented(Foam::word const&, Foam::dictionary const&) at ??:?

#3  Foam::simpleFunctionObject::updateMesh(Foam::mapPolyMesh const&) at ??:?

#4  Foam::functionObjectList::updateMesh(Foam::mapPolyMesh const&) at ??:?

#5  Foam::polyMesh::updateMesh(Foam::mapPolyMesh const&) at ??:?

#6  Foam::fvMesh::updateMesh(Foam::mapPolyMesh const&) at ??:?

#7  Foam::dynamicRefineFvMesh::refine(Foam::List<long> const&) at ??:?

#8  Foam::dynamicRefineFvMesh::update() at ??:?

#9  ? at ??:?

#10  __libc_start_main at ??:?

#11  ? at ??:?

Best regards!

Big Orange

Sorry for the late reply.

You may find the solution in https://www.cfd-online.com/Forums/op...ion-error.html
Then you need to recompile it. I myself still struggling with it.

Regards,

Elham

Although it the question is for long time ago but for future reference this would be really helpful:

https://sourceforge.net/p/openfoam-e...b19a37/#diff-4